1 / 3
SK120x compact short case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact case that is only as tall as the module itself
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A compact case that is only as tall as the module itself while having all the input and output I need. It's in 4 part to make printing and assembly easier since it have so many connections.
It's a bit flimsy while being assembled, but very solid afterward.
- Input: XT60, Powerpole, DC barrel jack (5.5x2.1mm) and USB Type-C PD as input options.
- Output' Powerpole, DC barrel jack (5.5x2.1mm), USB Type A and USB Type-C PD (using SW3516 or SW3518 board) for outputs.
BOM:
- 1x SK120x buck-boost converter module. It's capable up to 36v and 6a.
- 2x Powerpole
- 1x XT60 connector (both male or female are compatible)
- 2x 5.5x2.1 DC barrel jack
- SW3516 or SW3518 USB Type-C PD board (can only buck, so if you want to use 20v Type-C output, you'll need to set the module to output at least 24v)
- 4x 3mm screw, 6mm length.
- Cables cut to lengthA compact case that is only as tall as the module itself while having all the input and output I need. It's in 4 part to make printing and assembly easier since it have so many connections.