1 / 3
Holder for a TalentCell Portable 12V Li-Ion Battery Pack — zdjęcie 1
1 / 3

Holder for a TalentCell Portable 12V Li-Ion Battery Pack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a bracket used to hold a TalentCell YB1206000 portable 12V battery pack using a 25mm tube clamp.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This is a bracket meant to hold a TalentCell YB1206000-USB portable 12V battery pack. I created it because I needed a 12V battery to power the ground station I use for my drones. It has a butterfly clamp that fits the my tripod, but it shouldn't be too hard to remix the clamp for other size tubes.

The clamp uses an M5 hex bolt and wing nut, and is attached to the main body using a pair of M3x8 socket cap screws and hex nuts.

The side basket can slide out to release the battery, it is held in place using an M3x8 socket cap screw with an M3 washer and hex nut. The hex nut is fully enclosed inside the part so make sure to pause at the right time to insert it. The depth of the slot is sized specifically for M3x8 with a washer, do not use a longer screw or it will bottom out before being tight.

Print in ABS

Tagi