Round File Handles for Chainsaw Files and Needle Files
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a file handle for holding standard chainsaw files and needle files.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 557
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These file handles are designed with an ergonomic round bulb base, that is designed to comfortably rest in your palm. By using your palm to push the file, you need very little squeezing force with your fingers, preventing cramping and discomfort when filing for an extended period of time.
I printed these in PLA with an 10% gyroid infill and the round bulb side facing downward against the print bed. I used both an external brim with 20 layers and organic / tree supports to increase print quality and print bed adhesion. I also recommend using perimeters with 6 layers for added strength and longevity.
Other models are available with slightly flat bottoms to make printing easier without supports and to leave a smoother final surface.
This is a file handle set, that includes one model with a universal adapter to fit the following chainsaw file types:
- Flat File w/Taper for Depth Gauges
- Double-Bevel File w/Taper for Square Grinding 0.325" or 3/8" Saws
- Chisel Bit Triangular File / Three Square File for Square Grinding 0.325" or 3/8" Saws
- 7/32 in (5.5 mm) Round File w/Taper for 3/8" Saws
- 3/16 in (4.8 mm) Round File w/ Taper for 0.325" Saws
- (Loose Fit) 5/32 in (4.0 mm) Round File w/ Taper for 0.325" LP Saws
The second file hand is a small / low profile taper for very small files, such as:
- 5/32 in (4.0 mm) Round File w/ Taper for 0.325" LP Saws
- 1/8 in Round File w/Taper for Pole Saws and Small Chains