1 / 2
Round File Handles for Chainsaw Files and Needle Files — image 1
1 / 2

Round File Handles for Chainsaw Files and Needle Files

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a file handle for holding standard chainsaw files and needle files.

Rating
5 / 5
Likes
61
Downloads
176
Makes
0
Views
557
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

These file handles are designed with an ergonomic round bulb base, that is designed to comfortably rest in your palm. By using your palm to push the file, you need very little squeezing force with your fingers, preventing cramping and discomfort when filing for an extended period of time.

I printed these in PLA with an 10% gyroid infill and the round bulb side facing downward against the print bed. I used both an external brim with 20 layers and organic / tree supports to increase print quality and print bed adhesion. I also recommend using perimeters with 6 layers for added strength and longevity.

Other models are available with slightly flat bottoms to make printing easier without supports and to leave a smoother final surface.

This is a file handle set, that includes one model with a universal adapter to fit the following chainsaw file types:

  • Flat File w/Taper for Depth Gauges
  • Double-Bevel File w/Taper for Square Grinding 0.325" or 3/8" Saws
  • Chisel Bit Triangular File / Three Square File for Square Grinding 0.325" or 3/8" Saws 
  • 7/32 in (5.5 mm) Round File w/Taper for 3/8" Saws
  • 3/16 in (4.8 mm) Round File w/ Taper for 0.325" Saws
  • (Loose Fit) 5/32 in (4.0 mm) Round File w/ Taper for 0.325" LP Saws

The second file hand is a small / low profile taper for very small files, such as:

  • 5/32 in (4.0 mm) Round File w/ Taper for 0.325" LP Saws
  • 1/8 in Round File w/Taper for Pole Saws and Small Chains

Tags