Panda Touch P1 series hex mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for the complete replacement of the original LCD for the Panda Touch.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Panda Touch
This bracket will replace the original LCD and will require some disassembly of the machine. This bracket requires you to replace the original wires with a USB-C cable to power the screen.
parts list:
- Panda Touch
- Panda Touch charging dock
- usb-c cable
- 4x originoal m3x6 screws
- PandaTouchMount - Bracket
- 2x PandaTouchMount - Spacer
- 4x m3x5 threaded heat set inserts
Needs printed supports for the arms that attach to the printer.
The mount needs spacers for the two bottom screw holes. If not used, the dock will bow, and the magnets will not be aligned correctly.
Panda Sense
this mod also support the panda sense
parts list:
- 2x original m3x5 screws
- panda sense
- panda sense dock
- panda sense sense
- original sensor cable
Alt Version
alt version is a version that doesnt use the heated inserts. should probably change the m3 lenght to 8mm long.