BRIO like Steam Engine - Upgrade and assembled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another nice locomotive design on which I made some modifications.Changes from original:-most of the parts are…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Another nice locomotive design on which I made some modifications.
Changes from original: -most of the parts are assembled together -thicker cabin walls -chimney positioned to boiler center -adjusted tolerances on printable axles -added option for M3 bolt axles -the front hole for the axle is positioned more towards the center avoiding cowcatcher -cowcatcher is a bit higher
Print Settings
Printer:
Print Rite DIY
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Notes:
Printed in PLA.
Select chassis based on axles you want to use. The upper part is same in both cases.
M3 bolts are glued with super glue.
Upper and lower part need also to be glued together.
Category: Toys & Games