Raspberry PI CM4 or CM5 DIN 35mm housing - live concept
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry PI DIN rail enclosure based on WAGO 789-XXX series technology
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
I'm using the external dimensions of the original WAGO 789-120 housing, but omitting the transparent 789-124 "flap" (cover). I'm designing my own housing designed to accommodate the CM4 and a base PCB. It will have at least two USB ports and one ETH port.
I'm using the "essence" of WAGO technology: the 789-129 spring-loaded, 3-pole, 5mm pitch connectors with easy bridging, the 789-126 rail clip, and the 789-122 cover (these items will need to be purchased from WAGO). The connectors will be for power, and on the other side, for Modbus RTU RS485, which I most often use in both home automation (Smart Home) and building automation.
For more information please visit: https://www.averon.pl/raspberry-pi-cm4-obudowa-na-szyne-din-35mm/
On this page I will present further updates to this project. Enjoy