Hornby loco packing bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some older Hornby packaging required the use of brackets screwed to the locomotive to stop it sliding about in transit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Some older Hornby locomotives require the use of brackets screwed to the locomotive to stop it sliding about in the clam-shell design packaging. Examples I know of are the rebuilt Patriot and the Stanier tank, but there will be others. If you have lost yours, then this item will stop yours getting damaged in transit. Best printed using an FDM printer as resin is likely to be too brittle.
This model did take time and effort to produce. If this model was of use to you, then consider supporting me. https://buymeacoffee.com/mjrrailway