Hornby loco packing bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some older Hornby packaging required the use of brackets screwed to the locomotive to stop it sliding about in transit.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Some older Hornby locomotives require the use of brackets screwed to the locomotive to stop it sliding about in the clam-shell design packaging. Examples I know of are the rebuilt Patriot and the Stanier tank, but there will be others. If you have lost yours, then this item will stop yours getting damaged in transit. Best printed using an FDM printer as resin is likely to be too brittle.
This model did take time and effort to produce. If this model was of use to you, then consider supporting me. https://buymeacoffee.com/mjrrailway