Simple Universal 36mm Nema 14 horizontal cable chain adapter - Voron Trident - EBB36 - can bus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super simple side chain adapter that requires only 1 part to print.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 930
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please like this model, It helps me justify the time expense.
This is a super simple and highly effective horizontal chain adapter for a Nema 14 motor (36mm). I have also included a stealth burner mount version that has an additional tab on the left side for more support.
The mount used on frame end of the chain is the basic adapter included in older Voron builds, I just reused mine. It is either a Switchwire chain anchor or the very original release of the 2.4. Either way, the IGUS two hole and generic 3 hole versions are included that I found buried in my file system. You can use whatever you wish, but this worked in a hurry.
Included is a FreeCAD 1.1 file that is easily editable with varsets. You must have V1.1 or higher. As of this writing this is a weekly release. It is just so much easier to get stuff done than the stable V1.02, that I could not bear it. https://github.com/FreeCAD/FreeCAD/releases/ *** Click the latest weekly header, then download from there.
In order to work for any application you have to adjust the height of the tower. You can suppress the Voron tab and you can also adjust the center to top of the mount distance. 53mm works for a Trident with a Stealthburner and an LGX extruder.
Please consider using my Amazon affiliate links, it really helps me dedicate the unbelievable amount of time to get these files designed, tested and re-tested until they work!
You will need:
2x 10mm long M3 standoffs or 10mm long heat set inserts. You could also cut down the 21mm standoffs included in the BTT EBB36 if they are on hand.
1x M5 x 40mm screw for the pivot.
2x M3x30mm screws to replace the 25mm long screws on your LGX Lite that are 20mm .long. If you have another extruder, the bolts that secure the motor need to extend past it by 3-5mm or so.
2x M3x20mm screw to hold down the EBB36 to the standoffs - if you have something like this.
* 1x M5 x 40mm long screw.
Grade 10 Black Oxide: M5 x 40mm: https://amzn.to/3ILQYGa
or
Stainless Steel M5 x 40mm: https://amzn.to/4nygwWK
* 2X Standoffs: https://amzn.to/4nygwWK
* M3 screws: https://amzn.to/4gM0K7T
*** this will be updated in the near future as the printer is tested fully. Right now it works great, but time will tell. Let me know if you need anything different, I will try to make this as universal and simple as possible.