ESP-C3-DevKit-M-1 Case with bottom mounting plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a nice case from @jacek. It adds a base with mounting tabs and space to enclose dupont connectors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The Openscad model provides a base plate with mounting tabs that can be screwed onto a remixed ESP-C3 Case bottom from @jacek. The base plate has enough internal space to enclose any dupont connectors that protrude from the bottom and a cable exit hole to allow the wires for external devices. I've included the Openscad in case you want to remix.
The original ESP32_c3_BOTTOM_V1.stl file was only modified to add two threaded M3 screw holes in the bottom to attach the base plate with M3x8mm screws. These are usually pretty hard to thread the first time, but should be easier after future use. I print with a 0.6mm nozzle with 0.3mm layer height, so you may have different results with your print.
The ESP32_c3_TOP_v3.stl file is attached for your convenience and has not been modified.
The photo shows the completed assembly and the screenshot is from Openscad just showing the base plate.