1 / 3
FLSUN T1 PRO naked fan mount & CPAP tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No more stock casing , easier to work with.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (19)Powiązane
Tested 3 times for the parts, should be printed with PETG, 4 walls, 15% infill.
The design was heavily inspired by this model.
https://www.printables.com/model/1321948-flsun-t1-pro-effector-cover-delete-parts
But i basically start over from scratch on OnShape.
https://cad.onshape.com/documents/454e4d898fcff24742101fb2/w/eae4e8c08d0c2b9fd478df72/e/9780ee230c1b28f8fc852fd1?renderMode=0&uiState=68dabaa472b3a1e1b3012a02
Fan mounts are available with 4mm or 5mm heat insert.
