1 / 2
Dragon Burner V8 to Chaoticlab CNC TAP V2 Adapter — zdjęcie 1
1 / 2

Dragon Burner V8 to Chaoticlab CNC TAP V2 Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of madmaxx890_199817 design to fit with the V2 CNC TAP

Ocena
0 / 5
Polubienia
11
Pobrania
152
Wydruki
0
Wyświetlenia
544
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Assembly:

  1. Be sure to fully insert the 2 heat set inserts from the back.  They should be recessed into the part a few mm before bottoming out.
  2. Place 2 M3 FHCS in the lower mounting holes of adapter (leave hanging in place)
  3. Attach to CL Tap with 4 screws (12mm on top, 6mm on bottom)
  4. Attach Dragon Burner to mount with 2x35mm screw and tighten lower mounting screws

BOM:

  • 2x 12mm M3 SHCS (top of mount to Tap)
  • 2x 6mm M3 SHCS (bottom of mount to Tap)
  • 2x 35mm M3 SHCS (Dragon Burner top screws)
  • 2x 6mm M3 FHCS (Dragon Burner bottom screws)
  • 2x heat set inserts