1 / 2
Dragon Burner V8 to Chaoticlab CNC TAP V2 Adapter — image 1
1 / 2

Dragon Burner V8 to Chaoticlab CNC TAP V2 Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A remix of madmaxx890_199817 design to fit with the V2 CNC TAP

Rating
0 / 5
Likes
11
Downloads
154
Makes
0
Views
552
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Assembly:

  1. Be sure to fully insert the 2 heat set inserts from the back.  They should be recessed into the part a few mm before bottoming out.
  2. Place 2 M3 FHCS in the lower mounting holes of adapter (leave hanging in place)
  3. Attach to CL Tap with 4 screws (12mm on top, 6mm on bottom)
  4. Attach Dragon Burner to mount with 2x35mm screw and tighten lower mounting screws

BOM:

  • 2x 12mm M3 SHCS (top of mount to Tap)
  • 2x 6mm M3 SHCS (bottom of mount to Tap)
  • 2x 35mm M3 SHCS (Dragon Burner top screws)
  • 2x 6mm M3 FHCS (Dragon Burner bottom screws)
  • 2x heat set inserts