1 / 3
Toyota Prius Washer Hole Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a replacement front bumper cover for your Prius, It likely has these holes in it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have had your front bumper cover replaced on your second generation Prius (2010-2014) it likely has 2 square holes below the headlights.
These are for a headlight washer that was an option on some models. If you don't have that option, you just have 2 ugly holes to cover up.
This is that cover.
Easy snap in and lock into place. I printed mine in ABS, but PET-G would probably work fine.
Print without supports on face as downloaded, vapor smooth if you like. I recommend a brim for ABS.