Liczymy pasujące modele…
My center console (underneath the shifter) was a mess and needed something to organize it all. Specifically, I wanted something for coins as they would always get shoved into a cup holder and rattle around. I found some great examples…
I wanted to let someone borrow my roof racks for the Toyota Prius 1.8, but then could not find the key's anywhere. SoI gave them a drink, and I quickly did a 10-min design and 12-min speed print to make this working key. Hope it helps…
This funnel allows for easier refilling of the engine oil of a 2006 Toyota Prius. It fits into the opening in the engine block snugly and wedges in between other parts of the engine to make sure it does not move around when you pour in…
This is a larger cupholder for a Generation 3 Prius. The diameter is about 1cm wider compared to the original part. Printed in PETG at 0.20mm, 20% infill, no supports, 3 perimeters. Coated with resin for easy cleaning.
These are a small brackets which ensure that you can fix the broken Toyota Prius 2 tailgate with some new screw/nut and with some minimal glue. Unfortunetly I made it a two years ago, so I don't know how long screw and what kind of nut…
If the panel of your Gen 2 Prius liftgate has become dislodged, use these parts to provide reinforcement for the screw mounts. 1 and 4 reinforce the existing screw mounts. 2 and 3 go under the existing screw mounts but the screw sits down…
Simple little clips so that I can hang a generic plastic bag behind the center console as a trash can.
The standard 12V Yuasa battery ventilation adapter will not fit for a Varta B33 replacement battery. This 3D print will fit the rubber hose on the one end and the 5.9 mm opening of the Varta battery on the other side.
Print it upside down. I used PETG. It's harder to press but it won't be pressed by accident. After the print, heat the end and bend it. You can glue it with super glue.
It has only 3 pieces: house 1: pleace the motherboard in this part from side house 2: place the Cr 2032 battery and the small magnet (?) part from your original key. phisical_key_2: remove your key from the original key plastic part and…
For my first teenage driver The time had come. Our oldest child got his driver's license and we needed a good, safe, reliable car for him. We found a used 2007 Toyota Prius II that was in great mechanical condition but the prior owners...…
Printed in with variable layer height with 0.1 at the chamfered edges, and 0.3 at the rest. Supports required. Open the freecad file and edit the length/width parameters in the spreadsheet to change the tolerances.
Was tired of my boring old shifter knob and decided to make a “better” one. ^-^ One that I can use in my 2nd gen Prius (2008) and on any other m6 threaded gear lever. If you like it or even make one please post it, like, share, and…
Use high infill and print on side with supports. Remixed from Toyota Prius Wheel Center Cap - Power Symbol by schlem - Thingiverse so it would work in a Gen 4 prius.
This adapter allows me to hold some “squat” cups in my Prius C. I believe this adapter should fit all US PriusC models 2012-2019.
Every time I sit down or bend over or sometimes just take a step near my Prius when I have the keyfob in my pocket, one of the dadgum buttons will get pressed by a fold of cloth and the doors will lock or the alarm will go off, etc. I…
Prius V5 Yeti 18 oz. Rambler Cup Holder Adapter Problem: YETI Rambler 18 oz bottle is too large to fit in a Prius V5 front cup holder. Solution: make an adapter. Notes: Original cupholder is tapered (67.5mm at the bottom x 75mm at the top…
Visor clip that wraps around and should very closes match the actual shape of the visor of a Gen5 Prius. It has a section that is thinner for metal frames, and a section that can fit plastic frames.
The Prius Gen 2 usually comes with plastic aero wheel covers for the alloy wheels, but one of mine has fallen off. I made this hub cap to improve the look slightly. This should probably be printed in ASA, so that it isn't affected by UV…
This is an extension with a flat top for the under seat vent to suit a third gen Toyota Prius ZVW30 (2010-2014). Sits level with a bump in the floor so it creates a large, flat surface to mount underseat subs and amplifiers to, while also…
There is a space on the floor beside the seat and the door on a Prius (I have a gen3) and it would be a great place to store something liker an ice scraper or gloves, except that whatever you put in it will roll under the seat to…
Replacement for Genuine Toyota Fuel Tank Cap 77300-07020. This was for my 2012 Toyota Prius, but I believe it also fits Avalon and Camry models of the same model years. I printed this in TPU with 10 walls (100% infill). Tip for easier…
While I enjoy the Prius's center console storage, it was in need of some Gridfinity capable storage options. The plate features a centered Gridfinity compatible grid to better fit the space as the side edges of the console taper inwards,…
Designed and printed out a pocket/holder that can be stuck on the left hand side space between the two button panels. I used PLA as a test for now, would recommend ABS/PETG for heat resistance. I used nanotape to adhere the pocket, foam…
Sick of driving your boring Prius???? MANUAL SWAP IT! WOW!! so sport. much cool. Made for my 3rd gen Prius. Dogleg manual conversion. (clutch, transmission and skill not included)
This stops the Prius from incessantly beeping when transporting anything with the hatch open. Push the square side down into the latch slot until it clicks into place. To remove, simply activate the handle button on the door and it will…
This slides over the key fob and helps to prevent accidental pushes of the panic button, but still allows the button to be pushed. This was designed for an '06 Prius, but may work with other years or other models. I printed in PETG and…
6cm*2.5cm*0.37cm can be scaled as desired 2 models included: 1 with toyota logo on the back, 2 without logo. during printing you can change the filament to another color and the TOYOTA inscription will be in a different color.
This is an update to my previous Yeti Rambler mug adapter. This was designed around the new Toyota Prius cupholder. Aside from these updates, it has also been widened to work with other travel mugs and cups without needing to remove the…
Replaces the original cover of your cabin fuse box. Fuse diagrams are in your owner's manual, pages ~490-500. Options include a cutout on the left (recommended; fuse taps don't really have room to point right in this spot), right, or…
If you have an older Toyota Prius, you might have noticed the rubber collar is cracking or completely falling off and exposing the spring underneath on your antenna mount. That isn't a problem in itself except that the spring isn't strong…
Gen V (2026) Prius rear license plate bracket. Uses existing bumper holes, 5mm U nuts, 5mm threaded inserts, 5 mm bolts. No drilling of bumper. Outer holes are 210mm C-C, inner holes are 178mm C-C. Outer holes align with OEM bumper holes.…
To protect Toyota Prius (3rd Gen) Key Fob from wear. Printed in TPU slides and fits perfectly.
This is a clip for a gen 5 Prius with a sunroof/moonroof, which should clip onto the metal above the soft lining right in the center. It has two clips, for thin metal glasses, and thicker plastic sunglasses. I found anything on my visor…
Toyota Prius Gen5 have a lot of usb ports, but the usb module it uses only supply 5v@3a max, which is not a common setup that most mobile phone accepts. This means a lot of phone and tablet will have very bad charging rate when using…
This part is designed to repair your glovebox button if the button wants to fly off. There is a small retaining tab that breaks. This part slides in from the side. It is a friction fit. No glue necessary. I repaired the bottom button, but…
This small model is meant for the Prius V (also known as the Prius Alpha, or Prius Plus). I designed this to be inserted into the plastic shifter pattern to prevent the shifter from entering B-mode. It is very easily removable if needed,…
4D67 89904-47170 Blade : TOY48 Сам ключ имеет небольшое скругление, рекомендую прогреть и придавить об стекло
Top portion is 85mm wide, bottom is 81mm. Prints as two parts, either glued or held together with a small bolt.
The source files (SOLIDWORKS + STEP) are at: https://assista3d.com/marketplace/052bfe65-423a-4604-ba2b-501b77ba8e94 If you need a different size, message me and I might be able to edit it. Just let me know the dimensions
If you have an older Toyota Prius, you might have noticed the rubber collar is cracking or completely falling off and exposing the spring underneath on your antenna mount. That isn't a problem in itself except that the spring isn't strong…
The AC vent horizontal bar on my Prius 2014 became loose. Works best if printed in PETG (or any other heat tolerant material)
While I enjoy the Prius's center console storage, it was in need of some Gridfinity capable storage options. The plate features a centered Gridfinity compatible grid to better fit the space as the side edges of the console taper inwards,…
This part is designed to repair your glovebox button if the button wants to fly off. There is a small retaining tab that breaks. This part slides in from the side. It is a friction fit. No glue necessary. I repaired the bottom button, but…
This is a remix from iday's initial design. I've been looking for something like this for my car and he finally made it but it didn't hold my wallet or anything and I noticed there was still tons of room above the tray. So I raised it and…
The emergency key for my Prius key fob kept falling out so I made a thin case to hold it in. Printed in TPU, no supports. I'm including my poorly written openscad code in case you want to make adjustments in thickness or if you want to…
Designed an organizer for the centre console utilizing the gridfinity base I found online here: https://makerworld.com/en/models/1314348-gridfinity-base-for-2023-prius-arm-rest#profileId-1349141 This works for Prius Gen5 models, 2023+ I…
Printed in 95A TPU. 2 walls, 25% gyroid infill, oriented as downloaded. No supports needed. I used a reversed transfer punch in my drill press to press the two pieces together over a socket (a larger drill bit reversed will also work.)…
The AC vent horizontal bar on my Prius 2014 became loose. Works best if printed in PETG (or any other heat tolerant material)
Had broken original caps so printed replacements. Should fit for Toyota Prius, Prius Prime and Prius PHV from 2015 to 2022. Possibly fit other Toyota models. Toyota calls this part: Tonneau Cover Holder Cap #2 (#64938-47060). Printed in…
Description: This design for the Toyota Prius Gen 2 key fob cover includes the panic button on the front of the fob that most 3-button versions include. Tolerances and geometry of the original model have been completely redesigned for…
This is a phone cooler that is confirmed to work on a 2024 Prius Prime. Whether or not it will work on other cars is unknown. If it works on others, please post it in the comments. The outlet snaps into to the passenger outlet and the…
If you have had your front bumper cover replaced on your second generation Prius (2010-2014) it likely has 2 square holes below the headlights. These are for a headlight washer that was an option on some models. If you don't have that…
Designed for an iphone 6+ and a prius v. Fits both horizontally and vertically (on the left side). Added a second connector compared to the original design due to more plastic and width of the phone holder itself. The design is a little…
Reupload of a thingiverse model. This model works well with tree supports (and in ASA for UV resistance).
This is an oval shaped funnel designed to more easily pour oil into a 2nd Generation Toyota Prius engine. It is also a good fit on a 2025 Lexus ES 300h engine. Application to other Toyota and Lexus models is unknown. Parameters I used for…
This is a wheel cap for a Gen 3 Toyota Prius that has the Tudor Rose emblem that is found on Tudor watches.
This is a bag clip for a Gen 5 Prius. It fits right where the hinge is, so it doesn't interfere with any other storage. In my experience it's so out of the way I forget it's there, other than when I want to use it.
This is a storage tray for a Gen5 Prius, with a section that fits lens wipes perfectly, has a coin section, and should not interfere with USB cords plugged in there. Unfortunately it's just too big for most printers. I should probably…
Wondering what to do with your card slot in your Prius V? Use this replacement to cover it up, or mount your own thing with an M3 Screw! Print orientation For the best looks, print in the default orientation already in the model. The tabs…
This model is the ball side of the mount. Not the socket/phone side attachment. The versions with the ball in the middle need to have support for the ball. The left and right versions shouldn't need support on most printers. Mouse ears or…
Simple sunroof attachment for a mirror to see back seats from divers place. Fits Toyota Prius Plus (Alpha, Prius V). Could fit to Prius III sunroof. Print setting Print on side to increase strength. Print in vase mode (0.5 mm extrusion…
I love my Prius. I love putting stuff in the center console. I love finding stuff I put in the center console. Anyways, here's a three tier organizer. Only fits in one way. I've split stuff up so you can print it on smaller printers and…
The thread holding the bolt for the original was stripped, have to melt it off to remove it. the original bolt from the old clamp can be reused.
The car keeps beeping when something heavier is transported on the passenger's seat. This model enables to prevent the beeping. Never use it when a human being is sitting on the seat, always buckle up. I suggest you use bigger infill to…
