Better Prius Gen V Rear License Plate Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better Prius Gen V Rear License Plate Bracket
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Gen V (2026) Prius rear license plate bracket. Uses existing bumper holes, 5mm U nuts, 5mm threaded inserts, 5 mm bolts. No drilling of bumper. Outer holes are 210mm C-C, inner holes are 178mm C-C. Outer holes align with OEM bumper holes. Inner holes align with US license plate. Will fit 2024 thru 2026 Prius. May fit other Toyotas with 210mm spaced holes. Easily modified to fit other automobiles and license plates.
Photos of SS U Nuts are from Amazon, SS Bolts were used along with 5mm heated inserts
Longer bolts secure bracket to Prius. Shorter bolts secure license plate to bracket. Install a 5mm heated inserts into each of the 178mm C-C inner holes.
Photo of black bumper shows factory hole with rectangular surrounding. The ragged hole in the upper right was “dealer installed” via a self tapping screw. Their caveman method of attaching a rear license plate to a new car, Argg!.