1 / 4
Toyota Prius Gen 2 liftgate handle fix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glue-in parts to reinforce the tailgate handle
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 985
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
If the panel of your Gen 2 Prius liftgate has become dislodged, use these parts to provide reinforcement for the screw mounts.
1 and 4 reinforce the existing screw mounts.
2 and 3 go under the existing screw mounts but the screw sits down lower (it'll still reach).
Print with ABS or ASA for temperature resistance.
I glued mine in with copious amounts of JB Weld (the original kind) epoxy.