1 / 2
Prius ZVW30 Passenger Under Seat Vent Extension — zdjęcie 1
1 / 2

Prius ZVW30 Passenger Under Seat Vent Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Under seat vent extension with flat top for mounting underseat amps and subwoofers

Ocena
0 / 5
Polubienia
9
Pobrania
31
Wydruki
0
Wyświetlenia
415
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
GNU General Public License v3.0

This is an extension with a flat top for the under seat vent to suit a third gen Toyota Prius ZVW30 (2010-2014). Sits level with a bump in the floor so it creates a large, flat surface to mount underseat subs and amplifiers to, while also keeping airflow from the vent unobstructed.

Fits snug and latches onto features of the factory vent.

This was designed for a RHD JDM Prius. Not sure if it will suit USDMs - might just need to be flipped. .STEP file is available if you want to do tweaks.

Model was designed with 3D printing in mind.
Ideally print with PETG or above.
Measures a little over 240mm tall.
If your printer can handle 45deg overhangs you should be able to print this supportless.
I recommend a brim on bedslingers, but it should be okay without a brim for core printers.
.2mm layer height for a quick print.

NOTE: Photo was before I added the upturn at the end for better airflow path.

Tagi