Tuya / Moes TS0044 Holder / Mount for UK light switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder/mount for the Tuya TS0044 Zigbee smart switch that allows you to place it neatly over UK light switches.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder/adapter for the Tuya TS0044 Zigbee smart switch (often branded as Moes and others) that allows you to place it neatly over a UK light switch - similar to a lot of the offerings available for Hue dimmers. The TS0044 is easy to insert and remove, simply remove the grey back cover on the TS0044 then slide the switch onto this cover and click into place. To mount the cover on a UK light switch fitting you can either use adhesive pads between the cover and light switch or remove the existing light switch M screws, place the cover over the light switch and reinsert (Note: you may need longer M screws for some dry lining/wall boxes - size is M3.5 and can be found on Amazon/eBay). Easy and quick access to the light switch(es) by removing the TS0044 if you should need to. This is an original creation, I hope you enjoy it :)
IMPORTANT ELECTRICAL SAFETY: Always isolate (disconnect) the circuit at the consumer unit before fitting. This model is intended only for use over an existing light-switch face plate - do not fit it over bare wiring. Although the model does not contact any wiring, always cut the power before loosening face plate screws and verify dead with a suitable tester. If you’re unsure, ask a competent electrician to fit it for you, or use adhesive pads instead.
Print at 0.2, face up, use supports.
This model is provided for free but I do accept tips for coffee! ;D https://ko-fi.com/ellnic
If you enjoy this model or its concept, I'd really appreciate a comment and like :)