1 / 3
GRIDFINITY 1/2 INCH SHANK DRILL HOLDER 1/2 TO 1 INCH — zdjęcie 1
1 / 3

GRIDFINITY 1/2 INCH SHANK DRILL HOLDER 1/2 TO 1 INCH

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gridfinity holder for 1/2-inch shank drills 1/2-inch diameter to 1 inch diameter

Ocena
0 / 5
Polubienia
4
Pobrania
15
Wydruki
1
Wyświetlenia
150
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

modeled on fusion 360 using the gridfinity design.  Should fit most standard ½ shank drills up to 6.4 inches long.  Letters are extruded so a pause can be added to change color for the letters.  Before printing the 2 larger files, I would recommend printing the 1 inch or 63/64-inch single drill model first to test fit your drills. Cut in slicer as needed for smaller build plates. These files will work as is for QIDI PLUS 4 or bigger build plate.  Thank you for downloading and please share your make for the community to see.     

Tagi