Pokemon TCG: ETB shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable Shelf for ETBs held by command strips
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple 3d printable shelf for holding ETBs. Mounts to the wall using two sets of command picture strips. I don't keep much bulk in my ETBS, so I'm not sure how well itll hold up to bulk being stored on them, but it works fine with just the bulk from the boxes themselves in them.
Build requires 10 m3 heatsets and 10 m3x8mm socket cap head screws. I've also used m3x10mm screws with no issue, so I imagine either would work fine here.
Everything prints flat, the way you (and your slicer) thinks it should print. No supports needed.
I've also included the STEP file here. Feel free to remix.