Ducato Camping car front screen plissee (pleated) blinds

I created an easy to print, cost effective and easy to handle cabin blinds for our Ducato camping car (RV)

Additionally, I did not want to punch holes in the car. Our Burstner camping car came with curtains, not easy to apply for the night and hard to stow away.

The "commercial" solutions are far too expensive for me. This is the result for now. The season is at its end so I defined this version 1.0 and off we go for another trip.

For the build you will need:
2 Cheep blinds from Ali or alike shop (width 150x90cm, can be cut for exact window width using a utility knife and the height using a metal saw)
6 round magnets with a hole. I attached the magnets with a hole to the original press stud connectors.
6 round magnets (glue them to the blinds in the correct orientation)
1 hole punching tool
2 aluminum 8mm tubes or 4.5mm steel (curtain) rods (cabin width)

Use:
PETG, PLA will melt in the hot summer sun.

You can use a (aluminum) rod 10mm outer diameter or a solid steel rod 4.5mm (used for curtains opening/closing) (for the Dutch people: try Gamma)

Assembly instructions:
1 Print the parts:
 2x Door-clamp(4.5 or 10mm) one pair, fitting your tube dimensions
 1x Mirror-ClampA (fits both tube dimensions) 
 2x Mirror-ClampB (fits both tube dimensions )
 2x Mirror-ClampC (fits both tube dimensions) 
 2x Keep-Open-Clamp
 1x measuring-Tool (option)

2 Use the punching tool and the measuring tool.  Punch holes in the curtains only on the on the top. (Keep the silver side out and the black inwards)

3 Squize the Door-Clamps behind the plastic near the front window.

4 Assembly the mirror parts:
a) Put Mirror-ClampC in the Mirror-PartB
b) Shift the parts to Mirror-PartA (it should press fit, you can apply glue to fix Mirror-ClampB to MirrorClamp-A)

5 Cut the tubes to the correct length.

6 Attach the curtain onto the tube. Mount the tube beginning on the door site, and lock it with Mirror-ClampC.

7 Glue magnets to the curtains (correct orientation) so it will keep the curtains close to the window post magnets.

8 Use the Keep-Open-Clamps when driving.

Have a look at these projects:

https://www.thingiverse.com/thing:3671933

https://www.printables.com/model/307428-campervan-curtain-holder

https://www.printables.com/model/600885-plisseeriegel-verschluss-frontscheibe

Enjoy!
Oh, one more thing, you might like also my other plissee project
https://www.printables.com/model/1711617-ducato-camping-car-side-screens-plissee-pleated-bl

s10k