1 / 8
Fin holder for prijon kayak
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for fins - helps to go straight a little easier
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Why?
The prijon cruiser 430 can be used without steering, it is however kind of difficult to go straight. If you add a fin this is much easier.
How?
- Add this to the mounting pivot of your kajak and you can squeze in normal fins that are 8.5mm wide. You can measure other dimensions in your slicer.
- You will need some screws (M4 or M5)
- You might need to trimm the fin to size (lenghtwise) or remove the pins. you might also need to drill a hole depending on your fin.
- You can also print a fin, there are quite some on the usual model websites. (Scroll here to the very bottom and you will find the first ones)
Adapt/Remix!
Step file is provided for further modification. Note that you do not need CAD capabilities to suit it to your needs. Try to adapt the model in the slicer or create parts (like a shim) you need to adapt it to your fin by using the basic geometries in the slicer.
Edit 2025-10-30:
- Added two parts for 8 and 9 mm thick fins
- Added a shim of 0.4mm height.
- Print this laying on the side!
- If you need a bigger shim, scale it in the slicer according to your needs.