LCD Mount for Prusa I3x RepRap Discount Chinese clone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified mount designed specifically for the DIY Tech Shop Prusa I3X kit. I have no affiliation with DIY…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a modified mount designed specifically for the DIY Tech Shop Prusa I3X kit. I have no affiliation with DIY Tech Shop. I found a similar LCD mount for a true reprap discount LCD panel, but that did not fit due to the location of the mounting holes on my Chinese version of this LCD.
I modified the mounting holes and also shortened the mount a bit so it is not so tall.
Instructions
It is very simple. You print the 2 parts, one is left and one is right. It has a cutout for the SD card. You need 4 3mm bolts and nuts. Simply mount the LCD with the 4 bolts, then slip the mounts on the top of the Aluminum Frame! Enjoy
Category: 3D Printing