YACC (Yet Another Cable Clip) Parametric NoTPU Needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cable clip that holds the heads of charging cables. It uses Double sided tape. It uses no TPU. No supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
What:
There are many cable clips on this site, and this one it one of them. This print aims to solve the gap of parametric non-flex SIMPLE cable clips.
To use this clip: mount to a desk holes faced up with double side tap. to place a cable thread the cable through the gap, and the U-shaped geometry will catch the head of the cable.
Why:
I looked on the site for a simple cable clip I could print out in a few minutes. I did not find anything I was looking for.
How:
Here is the Onshape link for the files
This design uses parametric design, so others can customize to their needs quickly
I figured a design with no overhangs, simple geometry, and easy to use would be the goal
Print Settings
Important settings will be marked with Orange color *All Settings are a suggestion but what it was designed for
| Layer Height: | 0.35 mm |
| Nozzle: | 0.6 mm |
| Infill: | 15% |
| Infill Type: | Gyroid |
| Material: | PETG preferred, PLA |
| Supports: | No |
| Vertical Shells: | 2 |
| Perimeter Generation: | Arachne |
| Raft/Brim: | No |
Stats:
| Mass: | 3 g |
| Volume: | 2330.2833 mm³ |
| Surface Area: | 1763.62615 mm² |
Vars*
This is outdated. refer to new Var graph
| ClipWidth | 48 mm | |
| CableWidthVAR | 6 | mm |
| CableWidth | 12 mm | must be a factor of #ClipWidth. |
| SlotSofenEdgeVAR | 15 | Add #SlotSoftenEdge % here |
| SlotSoftenEdge | 1.8 mm | Percentage of #CableWidth. Cannot exceed 25% of #CableWidth |
| FiletPercentageVAR | 3.333 | Add #FiletPercentage % here |
| FiletPercentage | 1.6 mm | Add #FiletPercentage % here |
New VARs
| NumberOfCables | 4 | Use config menu to change |
| NumberOfCablesVAR | max(1,#NumberOfCables) | DONT CHANGE |
| CableWidth | 6 mm | Use config menu to change |
| CableWidthVAR | max(1mm,#CableWidth) | DONT CHANGE |
Changelog:
October 4th 2025:
- Changed Scaling logic
- Added ability to toggle off the linear scaling of the width of the part. This makes REALLY large cables more practical. If you are not using less than 10 Gauge wire then leave this unchecked. This is just to save filament. Beware that unchecking this may added a leverage force greater than 3M adhesive forces.
- Overhauled Variables
- Added a linear scale to the Filet. This eliminates #FiletPrecentage and its VAR.
- Changed the slot edges to be tangent to front half. This eliminates #SlotSoftenEdge and its VAR.
- Added Query var, so that Onshape will always select new geometry generated by changes
- Added ability to choose how many cables you want on the model. This replaces having to do the math and calculating the factor of the length. This is now all automated.
- Fixed weird bug with the first tangent curve on sketch 2 not using a projected vertex from extrude 1