ARCS Insert - Base Game + Leaders and Lore (Sleeved Cards)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ARCS by Cole Wherle / Kyle Ferrin Stylish Storage Solution for Base Game + Leaders and Lore + Sleeved Cards.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 57
- Wydruki
- 2
- Wyświetlenia
- 516
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Arcs Board Game Insert – Storage for Base + Leaders & Lore Expansion
Upgrade your Arcs experience with this custom 3D-printable organizer! This insert is designed to hold every component from the base game and Leaders & Lore expansion.
✅ Compatible with sleeved cards (I use DragonShield)
✅ Fits flush in the original retail box—no overflow
✅ Player trays ready for lightning-fast setup🚀 Sci-fi styling: Inspired by the ARCS aesthetic—designed for AMS multi-color accents.
🚀 Compact & portable: Trays stack snugly, so the entire insert feels dense inside the original box.
🚀 Precision-fit trays: All base + expansion cards fit sleeved, including Leaders & Lore decks.
🚀 Magnet-ready: Integrated recesses for magnets (6×1.5 mm, optional 3×0.6 mm for smaller resource trays) allow lids and stacks to “snap” securely together. Without magnets, lids will rest in place but not lock.
Print Time & Filament Cost:
A1 Player Cache + A2 Player Cache Lid = 86g (5+ hours) … note: 4 of these required
A3 + A4 + A5 Resource Trays = 52g (4+ hours)
A6 + A7 = 196g (13+ hours)
A8.1 / A8.2 = 48g (3+ hours)
Total on BambuP1S = ~640g (40+ hours) … note: estimate excludes AMS filament purging
AMS Multi-Color (Recommended)
White, matte black, red, blue, yellow, silver (limit 4 per AMS)
For the card box lid, I used 4 AMS colors + brushed orange/gray acrylic paint for a subtle Mystic Leader fade effect.
No AMS? Manual filament swaps via slicer pauses works—far more time-intensive.
Magnet Integration (Highly Recommended)
Player boxes & card box: 6 mm diameter × 1.5 mm height magnets
Smaller resource/dice trays: 3 mm diameter × 0.6 mm (stack 2–3 if needed)
Add a slicer pause before the magnet holes close, insert magnets, resume print for a seamless finish.
Legal & Attribution
This is a fan-made organizer.
Not affiliated with Leder Games or Kyle Ferrin.
All rights to Arcs, its logo, and associated artwork belong to Leder Games.
Modelled by James Mason on SolidWorks 2024
