Modular Tri‑Wedge Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,52 € – 1,86 € netto (bez VAT)
Dla pliku: Modular Tri‑Wedge Pen Holder_0.4n_0.25mm_PLA_COREONE_1h2m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,69 € netto (środek widełek).
- Masa podana przez autora
- 35 g
- Czas druku podany przez autora
- 1,03 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Minimalist, modular pen holder with triangular compartments; prints upright with no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
A clean, geometric pen/pencil holder designed to declutter your desk. Each unit features angled interior dividers that keep writing tools upright and separated. Great for home offices, students, makers, and anyone who wants a minimalist, modern look. Units can be placed side‑by‑side for a larger organizer.
Designed by hakkaisha.
Design Intent
A geometric pen holder that can be quickly printed with spiral vase mode.
Notes to capture when available
- Target users and tools (pens, markers, stylus, scissors).
- Intended environment (indoor desktop).
- Compatibility standards (e.g., fits standard pens and markers).
- Key constraints (simple, support‑free print; efficient material use).
- Durability goals (sturdy walls for daily use).
- Trade‑offs (minimal footprint vs. capacity).
Features
- Clean, modern wedge geometry with triangular compartments for separation.
- Stable, straight walls to keep pens and markers upright.
- Support‑free, single‑piece print for easy success.
- Modular layout: place multiple units together to expand capacity.
- Smooth outer faces for easy post‑processing or labeling.
- Flat base for reliable bed adhesion and desk stability.
Assembly
- None required for a single unit.
- Optional: to join multiple units, align edges and use double‑sided tape, thin foam tape, or a small bead of CA glue along the touching faces.
Safety & Usage Notes
- Avoid excessive heat; PLA may soften above ~50–60°C (direct sun or hot windowsills).
- Contains rigid edges—handle with care. Keep away from small children if scaled down.
- Not designed to bear heavy loads or act as a tool cup for sharp blades without a liner.
If you print this model, please share your make photos on Printables — I’d love to see what you create!
Support my work to help me create innovative designs and push creative boundaries. Your contribution fuels my passion and brings more unique creations to life!