Marvel United - Galactus and Larger Based Minis Storage Multiverse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Marvel United - Galactus and Larger Based Minis Storage Multiverse
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Marvel United - Galactus and Larger Based Minis Storage Multiverse
Notes:
- No Supports Needed.
- If you have a Bambu X1 or P1 you can print this on one sheet. Be aware that you will need to block the cutter with a 3d Printed Push in piece. (https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations)
This design is based on the fantastic Designs done by @tshelley. His Designs for Mini Storage were GREAT. I wanted to do something Similar to what he did for the Larger Minis and Galactus from Multiverse.
Link to tshelly's designs: https://www.printables.com/@tshelley/models
If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x MU_Galactus_Bigs_v0
1x MU_Galactus_NamePlate_v1
1x MU_Goliath_NamePlate_v0
1x MU_FinFangFoom_NamePlate_v0
1x MU_MoonGirl&DevilDino_NamePlate_v0
1x MU_Stature_NamePlate_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers