Marvel United - Galactus and Larger Based Minis Storage Multiverse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Marvel United - Galactus and Larger Based Minis Storage Multiverse
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 229
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Marvel United - Galactus and Larger Based Minis Storage Multiverse
Notes:
- No Supports Needed.
- If you have a Bambu X1 or P1 you can print this on one sheet. Be aware that you will need to block the cutter with a 3d Printed Push in piece. (https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations)
This design is based on the fantastic Designs done by @tshelley. His Designs for Mini Storage were GREAT. I wanted to do something Similar to what he did for the Larger Minis and Galactus from Multiverse.
Link to tshelly's designs: https://www.printables.com/@tshelley/models
If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x MU_Galactus_Bigs_v0
1x MU_Galactus_NamePlate_v1
1x MU_Goliath_NamePlate_v0
1x MU_FinFangFoom_NamePlate_v0
1x MU_MoonGirl&DevilDino_NamePlate_v0
1x MU_Stature_NamePlate_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers
