P-249 Back Flange for Victrola Exhibition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Back Flange for holding the reproducer to the arm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a back flange for a Victrola Exhibition. It is part P-249. It turns out this is a very annoying part to find on eBay and other sources, so here is a model for free.
I printed it with TPU at 100% infill.
It only takes about 30 minutes to print, and it has offsets on the back to capture the fins of the bushing that index on the arm. You will need to salvage the bushing from an existing flange.
The through holes are designed to be a very tight fit, so they are slightly undersized. The TPU is flexible enough to stretch over the bushing, and it gives a good positive grip.