1 / 2
P-249 Back Flange for Victrola Exhibition — image 1
1 / 2

P-249 Back Flange for Victrola Exhibition

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Back Flange for holding the reproducer to the arm.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
23
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a back flange for a Victrola Exhibition. It is part P-249. It turns out this is a very annoying part to find on eBay and other sources, so here is a model for free. 

 I printed it with TPU at 100% infill. 

It only takes about 30 minutes to print, and it has offsets on the back to capture the fins of the bushing that index on the arm. You will need to salvage the bushing from an existing flange. 

The through holes are designed to be a very tight fit, so they are slightly undersized. The TPU is flexible enough to stretch over the bushing, and it gives a good positive grip. 

Tags