1 / 3
Tray for Bosch Sanding Blocks S470/471 (or similar) — zdjęcie 1
1 / 3

Tray for Bosch Sanding Blocks S470/471 (or similar)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tray for Bosch S470/S471 sanding blocks (or other sanding blocks with 69 x 97 x 26 mm)

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
211
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I prefer to use the Bosch S470/S471 sanding blocks (or other sanding blocks with 69 x 97 x 26 mm) for superficial sanding of smaller parts.This tray holds the Bosch sanding sponges in place so that you can move smaller objects quickly and easily over the sanding blocks.

Depending on the size of the print bed, the tray is split into four or two parts, and there is also a part as a whole. Six clips are required, which can be printed in the color of the sanding blocks.The parts can be glued by superglue or dichloromethane, through the clips this is barely noticeable.  On the bottom of the tray are five recesses for anti-slip feet with 9mm diameter (I used some of this collection).

No special print settings are needed, I printed with 4 perimeters and 20% infill in PLA Matte Black.

Wanna say thank you? 🙏

Feel welcome to use this link for your next Amazon purchase or send me a coffee via PayPal. :-)

Tagi