Makita Guide Rail Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect Makita Guide Rails with these
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These connectors can be used to connect Makita Guide Rails.
The dimensions may differ for your guide rail. I provided the FreeCAD source so you can adapt them to your needs. To tighten the connectors in the guide rails, I use M4 nylon screws with metric M4x4 short inserts from CNCKitchen.
To cover some range, there are some variants of the connector:
- No Holes
- Simple M3 (use a tap to cut a thread)
- Simple M4 (use a tap to cut a thread)
- Insert M3 short (to be used with inserts from CNCKitchen)
- Insert M4 short (to be used with inserts from CNCKitchen)
In FreeCAD, you can select the Hole Type of the body Guide Rail Connector to choose a variant. Of course you can add more variants in the spreadsheet using a configuration table.
If you want me to add more variants, just let me know.
For printing I used PLA with 3 walls and 25 % infill to add a bit more rigidity.