Makita Guide Rail Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect Makita Guide Rails with these
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 97
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
These connectors can be used to connect Makita Guide Rails.
The dimensions may differ for your guide rail. I provided the FreeCAD source so you can adapt them to your needs. To tighten the connectors in the guide rails, I use M4 nylon screws with metric M4x4 short inserts from CNCKitchen.
To cover some range, there are some variants of the connector:
- No Holes
- Simple M3 (use a tap to cut a thread)
- Simple M4 (use a tap to cut a thread)
- Insert M3 short (to be used with inserts from CNCKitchen)
- Insert M4 short (to be used with inserts from CNCKitchen)
In FreeCAD, you can select the Hole Type of the body Guide Rail Connector to choose a variant. Of course you can add more variants in the spreadsheet using a configuration table.
If you want me to add more variants, just let me know.
For printing I used PLA with 3 walls and 25 % infill to add a bit more rigidity.