1 / 2
Slimbox 2040 Remix: RP2040 Pro Micro & 6x3mm Magnet Edition (Standard & 20-Button) — zdjęcie 1
1 / 2

Slimbox 2040 Remix: RP2040 Pro Micro & 6x3mm Magnet Edition (Standard & 20-Button)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slimbox 2040 Remix: Fits a RP2040 Pro Micro & 6x3mm magnets. No USB extension. Includes .3mf and .f3d source.

Ocena
0 / 5
Polubienia
4
Pobrania
25
Wydruki
0
Wyświetlenia
247
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

This is a functional remix of the excellent Slimbox 2040: stickless all button low profile fightstick by @tryptech, updated to accommodate more common parts and simplify the assembly process.

The Slimbox 2040 is a fantastic, low-profile, stickless controller designed for Choc mechanical switches and perfect for running the GP2040-CE firmware.

Layout Options

This remix is offered in two layouts:

Normal Version: Matches the original button count and layout.

20-Button Version: A compact layout designed for controllers with a maximum of 20 inputs.

Key Changes in this Remix

Controller Integration: This version includes a dedicated mounting slot designed around an RP2040 Pro Micro clone with a low profile USB-C port used in this build. Other controllers in the Pro Micro form factor should also fit.

Magnet Update: The magnetic backplate mounting holes were resized for 6mm x 3mm magnets (9 used). While the original 10x3mm magnets would likely offer a stronger hold, the 6x3mm size was used because it was readily available and performs well. A 10x3mm magnet version may be created in the future.

Easier USB Integration: The chassis was modified to remove the need for a USB-C extension cable, allowing for a more direct connection build.

Estimated Build Cost

The total estimated cost for the components and filament used in this build is approximately $30.95 USD.

RP2040 Microcontroller: $3.33 (($9.99/3 boards)×1 used)

Key Switches: $11.20 (($14.00/25 switches)×20 used)

Case Filament (Protopasta HTPLA, 210g): $12.60 (($29.99/500g)×210g used)

6x3mm Magnets (9 used): $0.79 (Approximate unit cost of $0.0879/magnet)×9 used)

Keycap Filament (Elegoo PETG, ∼40g): $0.56 

24 AWG Wire (∼20ft): $2.47 (Estimated)

Total Estimated Cost: $30.95 USD

Printing, Assembly, and Modification

A single .3mf file is included containing all necessary parts, pre-oriented and ready to load into your slicer.

The .f3d (Fusion 360) source file for both the Normal and 20-Button layouts is provided for anyone who wishes to modify the design further.Slimbox 2040 Remix: RP2040 Pro Micro & 6x3mm Magnet Edition (Standard & 20-Button)

Tagi