Slimbox 2040 Remix: RP2040 Pro Micro & 6x3mm Magnet Edition (Standard & 20-Button)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slimbox 2040 Remix: Fits a RP2040 Pro Micro & 6x3mm magnets. No USB extension. Includes .3mf and .f3d source.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
This is a functional remix of the excellent Slimbox 2040: stickless all button low profile fightstick by @tryptech, updated to accommodate more common parts and simplify the assembly process.
The Slimbox 2040 is a fantastic, low-profile, stickless controller designed for Choc mechanical switches and perfect for running the GP2040-CE firmware.
Layout Options
This remix is offered in two layouts:
Normal Version: Matches the original button count and layout.
20-Button Version: A compact layout designed for controllers with a maximum of 20 inputs.
Key Changes in this Remix
Controller Integration: This version includes a dedicated mounting slot designed around an RP2040 Pro Micro clone with a low profile USB-C port used in this build. Other controllers in the Pro Micro form factor should also fit.
Magnet Update: The magnetic backplate mounting holes were resized for 6mm x 3mm magnets (9 used). While the original 10x3mm magnets would likely offer a stronger hold, the 6x3mm size was used because it was readily available and performs well. A 10x3mm magnet version may be created in the future.
Easier USB Integration: The chassis was modified to remove the need for a USB-C extension cable, allowing for a more direct connection build.
Estimated Build Cost
The total estimated cost for the components and filament used in this build is approximately $30.95 USD.
RP2040 Microcontroller: $3.33 (($9.99/3 boards)×1 used)
Key Switches: $11.20 (($14.00/25 switches)×20 used)
Case Filament (Protopasta HTPLA, 210g): $12.60 (($29.99/500g)×210g used)
6x3mm Magnets (9 used): $0.79 (Approximate unit cost of $0.0879/magnet)×9 used)
Keycap Filament (Elegoo PETG, ∼40g): $0.56
24 AWG Wire (∼20ft): $2.47 (Estimated)
Total Estimated Cost: $30.95 USD
Printing, Assembly, and Modification
A single .3mf file is included containing all necessary parts, pre-oriented and ready to load into your slicer.
The .f3d (Fusion 360) source file for both the Normal and 20-Button layouts is provided for anyone who wishes to modify the design further.Slimbox 2040 Remix: RP2040 Pro Micro & 6x3mm Magnet Edition (Standard & 20-Button)