Counting matching models…
These unique gamepad-shaped beads are a great addition to any hoodie with drawstrings. Designed for gaming enthusiasts, they add a fun and geeky touch to your outfit. The hole allows for easy attachment to strings, and the minimalist…
A controller grip for the retro gamepad series from Commotron . Remixed from Jangles1981 's NES Controller Grip . Should be printed in a 45 degree angle for best results.
I changed the handle to get a better grip and a keychain in both sides I changed the clip to be more resistence and str
GAMEPAD ARM 1.0 slouží jako náhrada za PC myš. Na dvě páčky gamepadu se nasadí prodlužovací nástavce, které umožní pohybovat páčkami pomocí úst. Jednou páčkou lze ovládat pohyb kurzoru, druhou lze ovládat klikání. Aby bylo možné gamepadem…
for this print, you will need 4 pen springs for the buttons. Category: 3D Printing
Flydigi Apex 4 Controller Stand (No Supports, Optimized for 3D Printing) This is a custom-designed stand made specifically for the Flydigi Apex 4 controller. The geometry was carefully measured and modeled to ensure a precise and stable…
Double sided tape or two screws needed (Recommended), printed in Flsun T1 Pro. Comes with hole for the wireless dongle if needed. Open to any suggestions!
The ultimate low-latency bridge for FPV simulators. This version (v4.0) introduces a high-fidelity Betaflight CLI Emulation, allowing you to configure and flash your ExpressLRS receiver directly through the ELRS Configurator as if it were…
Brothers, maybe this model needs to be repaired in the slicer, I think he offered to fix it himself, and so l recommend printing on the standard settings with support (tree) but it fell off during the printing process. If you like the…
Just a simple stand to hold the big Wii U controller on a table. My dog chewed up the one that came with it, so I made a new one.
Proudly display your 8Bitdo PCE 2.4G Wireless Gamepad for PC Engine Mini, PC Engine CoreGrafx Mini, TurboGrafx-16 Mini & Nintendo Switch controller with this display stand. A single and double display are both available. Purchase: Also…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Infill : 15% No support needed Materials recommended: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth…
You can choose from standard and longer version of left and right girgers, depends on your gamepad dimension. Standard girders have 20mm for gamepad, longer version have 30mm. Upper and lower girders are same for both versions. You can…
Assembled with four countersunk M2.5 screws. If the buttons get stuck it may need some rough edges filed off the holes.
The game was originally developed for PS4. That's why a PS4 controller is also displayed in the game. But if you play on PC or directly on the quest, of course this doesn't work and the controller stays firmly in one place (At least if…
This is a grip for the original Nintendo Wii Remote to turn it into a proper game pad when held sideways. There are two version. The solid one is printable in one go and the Wii Remote is simply placed into the grip. The multi part…
You can copy and modify 3d model on your own in onshape
Description Intro I got new gamepads, and there was nothing for free that suit my needs and fit both pads. I got into Fusion360 and began creating something that works. Hope you enjoy :) I'm using dual 8-bitdo ultimate 2c controllers and…
I have been looking into having a gamepad and headphone holder for my Ikea Malm table. One day I saw 3DSpenny's headphone mount (here) and decided to model one for my gampad
Stand holder for gamepads. Well suited for gamepads of all types, especially Xbox shape.
Use this pipe sleeve and cable router in combination with all other plant pieces (tongue, teeth, pringles pipe topper, spots, and original gums) here: https://www.printables.com/model/502103-piranha-plant-piggy-bank-lid to create a Mario…
Traveling with a laptop and playing simulators is not a good mix and while I missed my HOTAS setup back home I thought of building a mini HOTAS I could easily take with me and not take up too much room yet still be easy to use. Connects…
Desktop Gamepad Hanger/Holder requires no screw to be attached to 18mm thick table. PLA Infill 15%
I bought a new ANBERNIC RG P01 Gamepad and decided to make a stand for it. I printed for my 8BitDo Pro2 controller this stand https://makerworld.com/en/models/121982#profileId-131327 thus decided to design something similar. The stand is…
This is a remix, the original design was made by @Kytor. Removed back storage for USB dongle. Added Skadis feet. Adjusted back to clear controller from the wall. Added Sega Saturn Logo.
Universal pad holder. Without supports. Can be screwed or hung. Material: Creality Hyper PLA Printer: Creality K1C Layer height: 0,24mm
I really like all those fancy gamepad holders, but wanted to save some space and keep it very simple. So here we are, you can actually store there anything, just design holder with hex 9.95 mm outer circle diameter. It's quite stable,…
I created a Gamepad RC Controller. The entire build is made of PLA. It is powered by single Li-ion 18650 battery. There are just three types of screws holding it together, which simplifies assembly and maintenance. This controller is not…
This version of the stand has a completely new design made from scratch so it is much more stable, is 5mm lower and 3mm shorter. It has even more space for the pad itself so there is no problem with pads that have some extras on the back.…
Shantae holding a gamepad with her hair Posed and edited from https://www.deviantart.com/danggon/art/Shantae-and-Nega-Shantae-XPS-871042841 Print Settings Printer: Artillery X1 Rafts: No **Supports:** Yes Resolution: 200 **Infill:** 38…
Simple controller holder. Includes two versions: - without text - with text (smoother) The option without text is very easy to print. If it does not fit your gamepad, try changing the width. I adjusted the width to my xbox gamepad. In the…
I have this gamepad for ages and love it. When thumbsticks worn out, I could not find replacement and tried to model one. At first it had too much friction so i adjusted according to Ender v3 SE. I think it can work with f710 and f510 but…
These unique gamepad-shaped beads are a great addition to any hoodie with drawstrings. Designed for gaming enthusiasts, they add a fun and geeky touch to your outfit. The hole allows for easy attachment to strings, and the minimalist…
A controller grip for the retro gamepad series from Commotron . Remixed from Jangles1981 's NES Controller Grip . Should be printed in a 45 degree angle for best results.
It uses 5 red cherry mx switches, 5 keycaps, 4 suction pads and a joystick cable.
Design of the Foldable Gamepad This compliant gaming pad offers a compact design, meant to be always with your phone and you. Pros : Compact. Only adds 4,5mm to the depth of the phone. Always have it when you need it. The grip can be…
Custom-designed analog stick replacements for the Genesis Mangan 400 controller. Tested and fitted for perfect compatibility. Includes a precision-fit split tube adapter and low-profile analog caps with slight central concavity for…
Modular Button Box based on a cheap USB gamepad PCB (e.g. Famepad or Esperanza). This project is a remix of an existing Arduino-based button box. Instead of using an Arduino, I reused the internal PCB of a budget gamepad, which works…
I changed the handle to get a better grip and a keychain in both sides I changed the clip to be more resistence and str
GAMEPAD ARM 1.0 slouží jako náhrada za PC myš. Na dvě páčky gamepadu se nasadí prodlužovací nástavce, které umožní pohybovat páčkami pomocí úst. Jednou páčkou lze ovládat pohyb kurzoru, druhou lze ovládat klikání. Aby bylo možné gamepadem…
8BitDo M30 Gamepad controller for use with Sega Genesis / Mega Drive or Analogue SG.
Minimal single-piece 3D-printable stand for Flydigi Vader 4 Pro. Should fit other gamepad models as well. Print without supports Layer height 0.12–0.20 mm
I got tired of continuously looking for the dongle for my Trust GXT 1230 Muta game controller, as the manufacturer failed to provide a storage option for it. The bracket is simply screwed (2x) into the bottom part of the gamepad (see in…
Just for fun I created earring model with gameppad aspect. I put it on cheap earring hooks like this : https://amzn.to/4gnC1GZhttps://amzn.to/4gnC1GZ Boucle d'oreille en forme de manette de jeu video. Elles ont été montées sur des…
Wii-U Stand with MMU logo for the Gamepad (Screen Controller). I filled in the logo to be printed with an MMU, and removed the console portion to only display the gamepad. It doesn't fit in there great, but works good enough for…
PS 5 Gamepad Halterung für Tischbeine Ø 60, PS 3 und PS 4 Controller passen auch Ihr braucht dann zwei Muttern M5 und zwei Senkkopfschrauben M5 x 16 mm für die Montage Die Muttern müsst ihr mit leichtem druck in die Halterung einpressen…
I bought a cheap 9-pin gamepad from SEGA on Aliexpress, but I didn't really like its shape and appearance. I was also a little bored, so here's a new case. Now it's a gamepad for my Amiga, so only two buttons are visible. Apart from the…
Game controller holder mounts to a table with a maximum thickness of 18.5mm using two M6 screws. Compatible with Speed Link Strike NX and similar (center thickness up to 30mm). Available in versions without cable holder and with cable…
for this print, you will need 4 pen springs for the buttons. Category: 3D Printing
Bluetooth Gamepad https://github.com/landroo/OpenSCAD/tree/main/gamepad https://github.com/lemmingDev/ESP32-BLE-Gamepad https://www.aliexpress.com/item/1005008763901701.html https://www.aliexpress.com/item/1005007716349715.html…
Wall mount for gamepad with mounting platform for double-sided tape so as not to damage walls or attach it to any place Preferred Print Settings Material: PETG / PLA Layer height: 0.2 mm Perimeters: 2-3 Infill: 15% (Rectilinear pattern)…
Gamepad/controller desk/wall holder. 2 versions: one for double-sided tape and one with holes for screws.
you can scale the holder to the right size of your controler as well so it can fit enny controler of the world.
This adapter was designed to connect my phone to my Flydigi Vader 4 pro gamepad, and it will also fit other Flydigi Vader/Apex models that have a standard mounting connector. To build it, you will need: 1. Print out 5 parts from this…
This is the second version (remix) of my Flydigi Vader 4 pro gamepad adapter. For convenience, a standard 1/4 clip can be installed on the gamepad, since in most cases standard clips of this type are used. The platform for vertical…
An adapter that allows you to use your EasySMX M10 smartphone gamepad and similar models, including those from other brands that also use a USB-C connection, on your computer or other USB-enabled devices. Basically, it uses a USB-C…
“Base” fits a regular Xbox One gamepad. “Base Slim” and “Base Slim + Jack” were modified to fit the Razer Wildcat controller and avoid interfering with the additional buttons and the audio connector on the bottom. Printed in Sunlu PETG at…
The under-desk hanger for my 8bitdo Ultimate 2C controller (likely fitting others too), for Multiconnect connectors with openGrid spacing (28mm). Bottom curve from this stand . Multiconnect slot from the modeling files . Dongle slot from…
Printed on PRUSA Core One with Black PETG plastic P.S Hope u like it , so comment or share a photo of model, or maybe some problems that i need to solve with it. Thank you!
I printed a lot of stands, but something was bothering me. So I decided to create a new one, which didn't take much time. I also modified it a bit, heating the front part with fire and placing the gamepad on it to make it comfortable for…
Pipe Gamepad Stand is a controller stand inspired by classic videogame pipe designs. It’s made to hold almost any game controller while adding a fun retro touch to your setup. The model is split into two parts that assemble easily and can…
Flydigi Apex 4 Controller Stand (No Supports, Optimized for 3D Printing) This is a custom-designed stand made specifically for the Flydigi Apex 4 controller. The geometry was carefully measured and modeled to ensure a precise and stable…
Double sided tape or two screws needed (Recommended), printed in Flsun T1 Pro. Comes with hole for the wireless dongle if needed. Open to any suggestions!
The ultimate low-latency bridge for FPV simulators. This version (v4.0) introduces a high-fidelity Betaflight CLI Emulation, allowing you to configure and flash your ExpressLRS receiver directly through the ELRS Configurator as if it were…
Tastatur/Maus/GamePad-Emulator mit Raspberry Pi Pico und CircuitPython, Cherry-Switches, Jogdial-Mausrad, Synaptics-Touchpad und OLED alle Infos unter…
Brothers, maybe this model needs to be repaired in the slicer, I think he offered to fix it himself, and so l recommend printing on the standard settings with support (tree) but it fell off during the printing process. If you like the…
Here are my custom thumbstick caps designed for pure thumb grip on gamepad-style FPV controller. Base printed in PETG, top in TPU 95. M2 (2mm) threading. The .STEP file is included so you can modify the thread or dimensions if needed for…
Just a simple stand to hold the big Wii U controller on a table. My dog chewed up the one that came with it, so I made a new one.
The original model works great on my game controller. However, I found that shortening the back section would save more space.
Hi Wii U peoples... Just got into the Wii U and with a used console, it didn't come with the charging stand. I needed a way to mount up the Wii U GamePad to avoid it getting scratched up and laying on a table where it will inevitably get…
This is a shell for the Wii U GamePad battery. It hold a little lose, but it works perfectly. It is designed for a 2500mAh battery, but I've included the 3D Models so if you wish to modify it to work with a 3000mAh battery you could.…
The Double Gamepad Stand is a minimalist, space-saving solution to organize your gaming station. This vertical stand holds two controllers securely, keeping them accessible and beautifully displayed. Its universal cradle design ensures…
Wall holder for the 8Bitdo SF30 Pro controller. If other 8Bitdo pads fit please let me know as i only own the SF30. If you need one of my things printed or you want to suggest a modification on a part please drop me a message! If you…
Wall holder for the Nintendo Switch Pro controller. Added untested plugs for plugging up the screwwhole because someone asked. If you need one of my things printed or you want to suggest a modification on a part please drop me a message!…
Combined stand for Nintendo Wii U with Gamecube controller adaptor. Cables can be tucked away underneath. Makes it easier to plug and unplug controllers if you play a lot of Smash like i do. All the vents will still be free to prevent…
Gamepad on a Pro Micro board with the QMK system. The board is attached with hot glue. The keys are connected via a 1N 4148 diode. A microswitch is located on the board for easy software modification. The housing is assembled with 8mm M3…
Here are several thumb sticks compatible with generic controllers using a metal stem analog. The 12 files available are identified as: V1 - Cross shape V2 - Round shape (easier to print) STD - Analog stem profile dimensions 2mm X 1.1mm…
Heavy-duty wall-mounted gamepad cradle compatible with Xbox, PlayStation, and Pro controllers. Designed with countersunk screw holes for a completely flush, sturdy mounting setup. Perfect for organizing gaming rooms and clean desk setups.…
ESP32 Gamepad A compact ESP32 XInput gamepad build with printable enclosure parts, button files, PCB/Gerber assets, and firmware references gathered into one rebuild package. What is included STL/CAD files for the enclosure and buttons.…
Junior loves playing Canabalt with his MakeyMakey, but said it was uncomfortable to hold. This controller was drawn by him and modeled by in Rhino Just print and stick the MakeyMakey ( http://www.makeymakey.com ) into this. I've included…
Print with suports for the best results For the right side you will have to mirror the file
I wanted a really high angle, more than what was offered on any other site; this one stands just shy of 3.5 inches. It is perfect in my opinion. This was made to be the most efficient (speed and as little material as possible) stand while…
I printed this in ABS-like resin and it worked well, slightly tight fit however so if you want to re-measure and move the posts feel free to Category: Video Games
I have been enjoying retro gaming using my Android phone and a cheap Bluetooth game-pad. This is an attempt to simplify the setup with a simple compliant, mounting, clip adapter. The intention here was to physically connect the two…
!ATTENTION!_ EXPERIMENTAL_DESIGN! (Print if you dare!) When I did some prototyping for the RG351p gamepad holder a print failed midway as for some reason the print head must have pumped into the print and went on shifted, until it was…
!!IMPORTANT!! DO NOT just slide your RG351P into the Game pad holder after Printing!! There is one important task to do before you can safely attach your Handheld to the game pad holder! CHECK Pictures for instructions!! Heat the marked…
A nice comfortable grip for your original RG350P and RG350M The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Game pad secures your…
Finally done, a nice comfortable grip for your original RG350. The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Gamepad secures your…
Proudly display your 8Bitdo PCE 2.4G Wireless Gamepad for PC Engine Mini, PC Engine CoreGrafx Mini, TurboGrafx-16 Mini & Nintendo Switch controller with this display stand. A single and double display are both available. Purchase: Also…
With google shutting down Stadia in Januar 2023 there will be a lot of controllers without a way to wirelessly connect them to the PC (If google doesnt decide to open the Firmware. And its a well made sturdy one from which there will be…
I love the NES Pi Zero controllers, and wanted to try my hand at a SNES version. Unfortunately the placement of two of the screw holes mean that the Pi Zero can't be flush with the front of the controller, so the ports are recessed a bit…
Gridifinity compatible xbox controller holder. Based on the work of Zack Freedman.
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168) The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the…
