Gamepad case for Radio Shack's Make: it Robotics Infrared Controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168)…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 32
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168)
The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the robot and the sensor...
The zip file contains all the assembly parts, including the remote controller (for reference).
You will need two small screws, about 1//8 diameter x 1 in. I just used two screws I found...
Print instructions
Category: Electronics Summary
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168)
The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the robot and the sensor...
The zip file contains all the assembly parts, including the remote controller (for reference).
You will need two small screws, about 1//8 diameter x 1 in. I just used two screws I found...
Print Settings
Printer Brand: Prusa
Printer: Prusa Steel
Rafts: No
Supports: Yes
Resolution: 0.15
Infill: 15%
Notes:
Rotate the cover_top part so that it lies with the inside up.