Counting matching models…
Mount for https://www.sparkfun.com/sparkfun-grid-eye-infrared-array-breakout-amg8833-qwiic.html. See https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/grideye.FCStd for the original model
A minimalist case for this esp8266 infrared module you can find floating about on Aliexpress. No screws/glue required, it's just snap fit. I recommend transparent PETG for the greatest aesthetic (but PLA works too). I use it with…
I always was searching for my remote for the LED lights. Now I have a place where to put it. I put it on a small rope to hang it in my living room. It can easily slide in and out. You can also operate the lower half of it even when it is…
I was afraid, that my baby gets too cold, since the maximum angle of our reer lamp is to high, so i added additional 15 ° of angle so my baby doesnt get cold feed during a diaper change :)
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
Adapter for mounting USB optical head for energy meters OR-WE-516, OR-WE-517 -Operates in IEC 62056-21 (IEC1107). Compatible with CP2102 Micro USB to Near Infrared IR Optical Magnetic Adapter Converter Cable for Electricity Meter Gas…
This is a holder for a regular 1 in pegboard, made to fit my thermometer. I printed it in PLA and added a design on the front, but the design didn't turn out well so I removed it from the STL. I did use supports for the top pegs, but I…
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…
With the new edition of Gears, boy is it time to outfit him with some stuff from his generation one days! First up is his personality circuit, which boy did give him one heck of a grump! This is sized to look like it fits into the nicely…
I remixed the wall mount, because I wanted to have two screw holes with a bevel, no text and round corners. Thanks to LICK_THE_BUTTER for the inital work. No supports needed!
UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…
Simple housing for a KY-022 Infrared Receiver Module The hole for the actual receiver is 9x9mm This was modeled off a module measuring 15.4 x 24.18 x 15.69mm. (This includes the pins and receiver) Print Settings Printer Brand: Creality…
The original design was superior to most other models as it takes up less space on the Skadis board and has the handle out for easy grabbing. However, it was for one specific brand/model of thermometer gun and didn't work with mine, a…
A compact infrared reflective sensor for fischertechnik, based on the TCRT5000 reflective optical sensor with transistor output . I needed them for a line-following robot. Use an analog input pin to measure the signal (sensor out pin).…
Wall mount for Infrared Temp Gun. Holds 2 AAA batterys so not to corroded in gun. works on: menards 84850 Benetech GM321 XRCLIF 520E harbor freight general IRT207
Camera Mount I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat surface (an existing pi case in my case). The pi camera should have been adjustable (direction / angle). I used some…
I wanted to protect the device from all the other stuff in my toolbox so I made this. It has an optional lid and spots to store two 9 volt replacement batteries from the device. I made mine out of ABS but I'm sure other materials will…
Pegboard Infrared holder for Mastercraft model Maximum 201610. This is for the north American 1" spaced pegboard. Print upside down with supports from table. Nozzle .4 Resolution .2 Hot end 210 Bed 60 Supports yes (from bed)
A holder for the braun thermoscan 3 ear thermometer. two versions: the first one uses a standard 5mm hole found in most kitchen cabinets plus a single screw. the alternative “no peg” version just uses a single screw to screw into whatever…
Self retaining dust cover for Parkside PTI 380 C2 Infrared Themometer. Your printer should be well calibrated in order for the dimensions to fit correctly.
Works well and does not use up a lot of space due to the angle.
Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…
This case‘s purposes are: Protect the sensor decrease the range “cone” of the infrared light easily mount it with a cable tie there are two different diameters (9mm and 12mm) so that you can decrease the radius as you need. My Infrared…
A case for an infrared receiver. The devices re-transmits any IR remote signal over the internet using Wifi, TCP/IP, and HTTP. Modules used: ESP8266 and IR Receiver/Transmitter pair Micro-controller:…
This cap protects the sensor of the Dostmann "Infrared-Thermometer FLASH PEN 31.1125" from dust, fuzz and dirt especially if carrying it in the pants pocket. Print Settings Printer: FIashForge Dreamer Rafts: No Supports: No Resolution:…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Best printed as oriented in the STL file. Support needed!
Skadis board Mestek Infrared Thermometer holder, the original file had a smaller shaft, which caused my thermometer to fall down from the board. if you do want to support me feel free to donate a cup of coffee
DJI Robomaster allows you to add the Infrared Distance Sensor on EP but in a terrible position right under the gripper. I tried to tape it with double-sided tape in the front of the hit detector but for better accuracy, the sensor needs…
Infrared sensor is most commonly used for object detection and avoidance. The effective range of the sensor is 2 - 30 cm, trimmer (potentiometer) is used to calibrate the sensor for desired range. Operating Voltage 3 - 5 V DC. It can…
EN: This is a Creality Sermoon S1 scan of a chestnut. The scan was created with a resolution of 0.2 mm and blue cross, parallel and single lasers. I also did an infrared scan. — I would be very happy if you have as much fun with the…
Heavy-Duty Foot Bracket for Vertical Radiant Panels (Large Model) Tired of flimsy, unstable feet for your infrared panel heater? This is a completely re-engineered, heavy-duty foot bracket designed for maximum stability, transforming your…
Multiboard Mount for Parkside Infrared Thermometer A compact and practical wall holder designed for the Parkside non-contact infrared thermometer. It’s made to fit perfectly on Multiboard systems and keeps your tool always ready for use.…
A shelf clamp for IR illuminators so you can mount to the end of a shelf and not a wall or ceiling. It is purely friction fit, no screws or anything necessary. IR illuminators will enable you to play VR with inside out tracking (Pimax…
Its just a simple holder for the Remote of (Heidenfeld HP500) and a few other heating panels that use the same remote.
This is a custom IKEA Skadis holder I designed for my no-name infrared thermometer, since none of the existing ones on Printables fit properly. The mount holds the thermometer securely while keeping it easy to grab when needed. The design…
Replacement handle for NutriChef Infrared Convection Cooker (PKAIRFR48). This fit perfectly when printed with Polymaker ASA Polylite. As such, if you print with other filaments, please take into account that ASA shrinks a bit. Honestly,…
Model was printed with a 0.4mm nozzle using PLA. The file contains both top and bottom case parts. Notable print settings: 0.2mm layer height 2 wall loops 4 top and bottom layers Filament Consumption This model uses ~ 5g of filament,…
Quick remix of https://www.thingiverse.com/thing:3298390 No supports are needed for pegboard hooks with this design. To achieve this I've simply performed Z height cut. By doing so overall z height has been reduced. Pros - no supports,…
Mount for https://www.sparkfun.com/sparkfun-grid-eye-infrared-array-breakout-amg8833-qwiic.html. See https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/grideye.FCStd for the original model
A minimalist case for this esp8266 infrared module you can find floating about on Aliexpress. No screws/glue required, it's just snap fit. I recommend transparent PETG for the greatest aesthetic (but PLA works too). I use it with…
I always was searching for my remote for the LED lights. Now I have a place where to put it. I put it on a small rope to hang it in my living room. It can easily slide in and out. You can also operate the lower half of it even when it is…
I was afraid, that my baby gets too cold, since the maximum angle of our reer lamp is to high, so i added additional 15 ° of angle so my baby doesnt get cold feed during a diaper change :)
A usb powered infrared hub for receiving and transmitting IR codes from homeassistant to make your dumb IR devices controllable from your smart home or to use an IR remote for controlling your smart home devices. Top of the case has space…
A dock/stand/cradle for the Klein Tools IR1 infrared thermometer. I printed mine with a brim, no supports, 15% gyroid infill, 3 perimeters, 4 vertical shells (top and bottom).
We use a Beurer infrared lamp. However, the original stand is defective in that if only allows the lamp to tilt up, not down. So I designed a replacement stand that allows tilting up and down. Print Settings Printer Brand: Prusa Printer:…
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Print with solid infill. The thermometer applies some force on the holder, so I printed with PETG. It works good. The design is focused…
This is a mount for the little IR Illuminator modules you can buy from amazon /ebay/china etc. It's designed to clamp onto the frame of the Prusa I3 Mk2S, It may or may not fit other printers - feel free to remix it so it does! I've cut a…
Remix for small holder for Infrared Thermometer for the Ikea Skadis board and Küpper EU board to fit thermometers with Ø17mm opening. Print with 100% infill.
Remixed Nicorn's design with standard pegboard spacing (25mm). Pegboard part by my bestest buddy Angus! Category: 3D Printer Accessories
The Mantis case features an open frame housing for better cooling of the LEDs. Its swivel base will help you position it on a Pi case, wall or other surface where you can either apply doublesided tape or screws. For assembly material…
Simple mount to keep the Thermometer secure and in one place
This thing holds a 5 mm LED to the optical transmitter of our Voltcraft VC850 digital multimeter. It should be compatible with VC820, VC830, VC840, VC850, VC870, VC920, VC940, VC960. It might even work for the corresponding UNI-T DMMs. I…
This is a "case" for a battery-powered infrared thermometer with a laser pointer built with a Wemos D1 Mini ESP8266 microcontroller and an MLX90614 sensor. By its data sheet this sensor has high accuracy of 0.5°C over the 0 … +50°C…
Pic 3 is of the remote in question, mine is for an Infrared Patio Heater, but there are probably loads of other products that use the same infrared remote. It fits either of the IKEA Hol tables. You need a little bit of support to print…
I didn't like any of the cases available for the IR Toy v2 which I was able to find on Thingyverse, so I went ahead and created my own case. The advantages of this compared to others is that it is not oversized, allows good IR reception,…
Print it standing up, supporless. mount with stickytape at an angle. The thermometer should be laid in a bit.
Case for a Thermal camera module. I designed it to be battery operated with an integrated type-c charger. Front and back panel (Sensorside.svg and Displayside.svg) are laser cut out of 3 mm acrylic. The red part of the svg image is…
Smartmeter infrared read/write sensor case for various smart energy meters used in germany. Parts list: Threaded inserts and M3 screws (2pcs) 5mm Neodymium Magnets (6pcs)
I think it was originally from Pi cam Top mount by Bpercival - Thingiverse but it's been a while and I just wanted to get it uploaded for my own reprinting.
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168) The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the…
Combined a Infrared Thermometer holder with a screwless stacker for ikea lack tables Print Settings Supports: No Infill: 10% Notes: The part can be mirrored to fit on the opposite side. Category: 3D Printer Accessories
Remix to support 20mm IR Thermometer openings.
Simple Holder for LOMVUM infrared thermometer. Could be mounted by double side tape or two M3 screws. Print Settings Printer: Haribo Rafts: No Supports: No Infill: 20% Category: Tool Holders & Boxes
Simple pegboard holder for infrared thermometer. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters.
Remix to support 16mm to 18mm IR Thermometer openings. I make it in two parts. The first is printed in PLA and the second in TPU I glue them together…
Slight adjustments for the Mestek Thermometer.
The remote control box for the infrared heater, made in such a way that it can be stuck on the wall under the heater and can be operated by pressing the buttons directly on the wall. Fits exactly on the remote control for the Cattara…
In this project tutorial, we will guide you through the process of building an infrared launch controller, allowing you to remotely launch rockets, drones, or other devices using infrared technology. This project is perfect for hobbyists…
Case for TRCT5000 infrared sensors with positioning help. Fits easily and needs no screws. If you want to see the status LEDs, just print the top part with transparent or white filament. Print Settings Printer Brand: Creality Printer:…
Cradle for the iHealth digital thermometer. Probably fits many other brands. They all seem to have a common shape. We have to use ours daily for daycare. Makes it a little cleaner since we keep it on the countertop.
I wanted to store an etekcity infrared thermometer, but i don't cad so well. I made a rectangular hole and plopped the thermometer in it. (its model is lasergrip 774).
This is the Open Source version of the E-by-J Infrared Camera. This is a complex DIY project that requires exact electronic components, wiring, and setup commands. Note that throughout much of 2020, the increased demand for thermal…
This is a bracket to attach an InfiRay Xinfrared T2 Pro thermal camera to a pan-tilt light. The purpose is to create a thermal camera turret that can be used on vehicles for spotting wildlife at night. This is meant to be used with 3mm…
Angled support for a garage door infrared barrier ( ABO-20L ) Category: Other
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Has a bit tilted nose 15° for a more secure hold. Uses universal hook to mount.
This is a 3D printable toy, the front wheels actuates the head and the back shaft can be configured to actuate the tail. it is possible to attach 4 N20 geared DC motors to the unit or two plane shafts can be used for the wheels. In my…
I adjusted it to fit a 14mm thermometer. And also made a hole in the middle to save filament
I required a small compact holder for my cheap infrared camera. to mount it between my print head and enclosure back wall. This gives a decent view for the required space. NOTE: Check the provided drawing if your camera has the right hole…
oleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
This is a pegboard mount for my infrared temperature gun. I wanted a pegboard mount that didn't take up too much space and that looked nice, which seemed tricky for the temperature gun design, so I came up with this and am quite pleased…
A 14mm infrared thermometer holder for my Ryobi Thermometer. Designed from scratch to match the Honeycomb Designed and be easy to print but heavily inspired by…
small mount for sensor Category: 3D Printing
holder for Infrared Thermometer for the Honeycombstoragewall.
This pin boot cover is made to fit my Flipper Zero Infrared (IR) Blaster case found at the following locations: https://www.printables.com/model/606855 https://www.thingiverse.com/thing:6106025…
This is a suit of armor befitting the esteemed Flipper Zero IR Blaster, forged by the renowned Rabbit-Labs. Armed with seven luminous hyperintensity LED emitters, this apparatus harnesses the power of infrared transmissions to command the…
angled mount will fit small and bigger thermometers, with openings from 12mm up use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4…
A corner mount for the ELP infrared USB web cam . Perfectly suited for getting mounted inside of an Ikea Lack enclosure to monitor print success with an Octopi. No screws or glue required (aside for fixing the mount to the Lack leg). The…
I needed a project box for my combo IR Transceiver and Micro USB board. A few hours and a lot of test prints later and here it is! Hope you like it. Nice and compact. Printed in Polymaker PolyLite Clear PETG so I wouldn't need any…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Support needed! I used 4 walls for stability. PLA worked…
I have a completely enclosed Ender 5 S1 (Creality official enclosure parts) running Klipper off a Pi 3. It is dark in there for a camera, and there are few useful mounting points to see the first layer without interfering with moving bits…
It is a non-contact thermometer that works with Arduino Nano and GY906 sensor and can measure and record temperatures. The model is completely in draft condition, with serious shortcomings. I have archived it for future reference. This…
INFRARED THERMOMETER - MAGNETIC HOLDER Keep your thermometer in the most handy place! Features Place on Refrigerator and use it for cooking. Stick it to your tool chest! Stick it to your auto (careful) Easy to assemble Easy to print - No…
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
Accuracy of reproduction +-0,2mm except overall dimensions, which are accurate to the specs. Please note that this camera has manual focus lens with screw ring - 1mm adjustment during use (from 23.8mm to 22.8mm overall length). If you…
Adapter for mounting USB optical head for energy meters OR-WE-516, OR-WE-517 -Operates in IEC 62056-21 (IEC1107). Compatible with CP2102 Micro USB to Near Infrared IR Optical Magnetic Adapter Converter Cable for Electricity Meter Gas…
A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics
