Raspberry Pi Night Vision Camera Mount (incl. Infrared spots)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera Mount I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat…
- Rating
- 4.5 / 5
- Likes
- 86
- Downloads
- 995
- Makes
- 8
- Views
- 5,066
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Camera Mount
I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat surface (an existing pi case in my case). The pi camera should have been adjustable (direction / angle).
I used some existing models and modified others:
- partly used and modified http://www.thingiverse.com/thing:2200231 (had to repairhead_front.stl before printing it with Prusa i3 (non manifold faces, zero faces, ...), fixed it with https://makeprintable.com/)
- modified https://www.thingiverse.com/thing:2275223 (rpi_cam_stand.stl) and made it a litte bit wider
I buildPiNoirCamCaseHolder-ball-mount.stl as a connection between the camera case and the ball mount stand
Attention: The ball mount in this version is a little bit to tight. So i broke the first print while trying to put it into the mount.
I will add a new version very soon. As an alternative you can sand off the ball and use grease to get it into the mount. =>solver in new version (20180104)UPDATES
20180104:
- added strengthening for the mountpoints toPiNoirCamCaseHolder-ball-mount.stl (in the previous version they broke while removing brim)
- widenedPiNoirCamCaseHolder-Rpi_Cam_Stand.stl because it was to tight
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: i3 MK2 MMU
Resolution: Normal (0.2 mm)
Infill: 20%