Biltema InfraRed Thermometer bracket for Multiboard
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.13 – €0.16 net (excluding VAT)
For file: Biltema InfraRed Thermometer Bracket_0.4n_0.2mm_PLA_MK4IS_8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 8.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Combine with Multiboard Drop-In Nut Weightbearing Snap - M3 to hold a Biltema 15-254 InfraRed Thermometer.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture.
Mounting
- 1 M3 Nut
- 1 M3 Screw
- 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight Bearing Snap - M3 - 3D model by Multiboard on Thangs)
- A Multiboard tile (see multiboard.io)
Print instructions
- 0.20mm Quality
- 3 Perimeters on Verical shells
- Print direction as provided in the model
- Filament: PETG or PLA (I've only tested with PLA)
- 15% grid infill