186 models
With this adapter you can attach toolholders from the MODULA system. This is a universal adapter for (metric) PEG boards, this one fits Biltema, Jula, Clas Ohlson, and many others world-wide, CC 12mm (15/32 inch) spacing of the 4mm (5/32…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Two layers of half-height stacked small divider inserts for 12 compartment plastic Biltema assortment box (product number: 71-729) for storing small numbers of small things. By printing all the inserts you can increase the number of small…
Print approx. €4.80–€5.87 excl. taxPreliminary estimate for one variant
Keep your Biltema wrenches organized and accessible with this custom-designed Gridfinity wrench holder. Designed to fit the Art. 10-500 and Art. 10-584 wrench sets (7 mm and 8–19 mm), this tray holds 13 wrenches securely in a 6 x5…
Print approx. €18.72–€22.88 excl. taxPreliminary estimate for one variant
This is a remix from @doc 's design: https://www.thingiverse.com/thing:2815022 I trimmed the back plate little slimmer, and made screw holes to fit Biltema perboard. I printed this with 4 walls and 4 bottom and top layers.Infill 10% is…
Biltema pegboard tool holders These are tool holders for a Biltema (Swedish store) pegboard. The holes are cc 12mm and has a diameter of 3.5mm. The FreeCAD files are included so you can modify them to fit different pegboards. Desk mount A…
Print, attach to pegboard, put drill bits into it, ready. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters.
This is a remix from @didymus : https://www.thingiverse.com/thing:2269374 I retrofitted his design to fit Biltema pegboard This takes 28 meters of filament (84g) and with layer height of 0.25mm and speed of 60mm/s is ready in little over…
I got tired of holding resin vat on top of sifter by hand very fast so needed to get some kind of holder for it. @alphaa had great design for that job, but I want to keep my table free from excessive clutter, so I remixed his design to…
Yeah, it's a holder for Ryobi multitool. Four screw holes are in place for Biltema pegboard, but you can also attach this with wood screws to other surfaces. Biltema begboard has 4mm holes 12mm abart. Print instructions It's important to…
This 3D-printed bracket mounts to a Biltema Multi-X 18V battery, enabling its use in various projects. It uses standard red insulated male spade connectors (6.35mm tab) for the terminals. Note: slight filing may be needed for a perfect…
You need a small burner to lots of things. Shrink wraps, removing paint, melting plastic, defreezing locks, wood burning, starting campfire, etc. This pegboard holder is made for Biltema branded small burner, which tank diameter is…
A bit of hot glue on the lower part to make it stick to the pegboard. The hooks are strong enough for a stack of grinding wheels.
This is a simple mounting mesh I made for the 110x180x70 Biltema Kopplingsdosa/ Junction Box. Edit: Added more!
Really quick remix for Biltema pegboard, as I needed one for HSW and one for Biltema pegboard. EDIT: Added remix for smaller 4mm hexbits.
Needed a tape holder for my clas ohlson pegboard so I adapted this great design: https://www.thingiverse.com/thing:3152263 Uses 8mm dowels but I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
Universal hook for Biltema / Angel-Cache fishing rods. Unlike standard screw-in or glued hooks, it requires no modification of the rod. It is intended for a 7–8 m carbon-fibre telescopic fishing rod with the last segment removed. The hook…
Print your own extra assortment boxes for Biltema Art. 71-815 These boxes can be stacked outside the assortment box If anyone wants a 3x1 box I can make a file and they can test it. I only need the 1x1, but modelled and tested the 2x1 and…
Wanted a holder for my Biltema superglue. Printed with PLA
These accessories are made for the 4mm holes and 12mm center to center pegboards made by Biltema in Skandinavia. 90 degree angle iron holder with 3 holes for fastening (No support needed) A universal converter for making it possible to…
I'm always searching for my hex keys (or Allen wrench or Allen key) so mayby this will help. Did you know in Finland we call hex keys "kuusiokolo", which translates to "six sides hole". Germans use the word "inbus", Italians call them…
Needed a pegboard holder for my tape measure so I designed one. I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
Holds different numbers of bits securely and removably to the toolboard. Printing PLA/PETG .2mm any infill no brim, no supports print face down (or vertically with a brim)
Updated 2026-02-20: A reinforced model is added because I hade a few snaps in different places. Mount in the center of the handlebar (31.8mm mount) next to stem. It is "off center" to be able to have it somewhat centered. I mounted it…
I made this hook for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…
Dentist tool, also known as Sickle probe or Dentist Explorer is very important tool in a workshop! For example if you need to remove small and tight rubbergasket without damaging it, this is the only tool that can make that happen! Okay,…
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
Needed some drawer dividers for my assormtent boxes from Biltema and Jula (scandinavian brands) They are the same make, just rebranded by the stores, so fits both, and probably a bunch more around the world.
After a great sugestion I combined two models and added som extra holders for small accessories.
This plug was made to replace a redundant socket on a three-way splitter to prevent overcurrent when used with stage lighting fixtures. Use at your own discretion, 3D-printed parts generally are not approved in any way, shape or form.…
Remix of PET holder attachment to spiderbeam pole (7 mm tip). Printed from PLA with 4 perimeters and 50% gyroid infill.
A simple holder for Biltemas Art. 36-4831 superglue with activator I've made it for multiboard, but since it's standard multiconnect, it should work with HSW and Ikea Skadis too, with the right snaps 0.2 Layer Height No support 3 walls…
Quick edit of existing model.
Holder for deburrer of the brand Biltema. Both for the tool and for two extra blades. Nothing special but it fits my needs.
Adapter for a Biltema Air blower, i suspect that is also fits other brands of airblowers (please do comment if that is the case!). Printed with a 0,6 mm, and 4 walls to make it solid (no infill), print with support.
The purpose of these are to shield the driver and passengers from the strobelight aimed out from the car. The angle is different between the stl-files but are made for the same strobe light bar. Depending on what window and angle you wish…
LM8UU and LM8LUU grease injector. Cap for the short version can be found on the original model. Files are now version 2: slightly looser tube thread fit made the interface between the "cap" and the injector part a bit thicker (this was a…
Holder for 3 extension lengths: 75mm, 125mm and 250mm. Made specifically for the Biltema 71-149 set (https://www.biltema.se/verktyg/handverktyg/hylsverktyg/krafthylsor/kraftforlangare-12-3-st-2000032235) This is my first model, i have not…
Simpel feet for Biltema Superglue bottle so it dosen't fall. You don't have to be worried that the open bottle is going to fall and mess up your creative space.
Update : In the first version of this model published the strength of the light holder was too weak I found out on the first ride and the first bump on the road. I have made some adjustments to to model - see STL file v0.2…
In order to finally be able to log caches high up in the trees, I bought a 12m carbon pole. To be able to get the caches down and up again, some attachments are needed. Typically those attachments are made from plastic pipes, wires, nuts…
a replacement cover for Biltema 15-287 multimeter with mounting for Probes it is based on a similar principle from Fluke Mulitmeters Print Settings Printer Brand: RepRap Printer: Hanbot DRT Rafts: Doesn't Matter Supports: Yes Infill: 100%…
Loctite holder for biltema walls. 24mm hole distance.
Bitsholder for the small compartments on the top of biltemas 71-723 toolbox, might work with the smaller “kraftig” toolbox. Only fits the two right compartments,
Wallmounted holder for Biltema 36-1813 microfiber waxpad. Its one of my first “from scratch” designs so Im sure it can be improved in more than one way so feel free to make improvements but it does the job just fine so Im pleased. Printed…
Print standing up, with brim. No supports. Preferably 4+ walls and 30%+ infill. Mount with at least 2 screws in the upper holes.
24/10-26 Redrew it so it looked a bit better. My original Biltema fuel cap split in two... Thread increased and reprinted until it fit my Biltema lawn mower perfectly. I reuse rubber seal from the broken fuel cap. 22/11-25 One and a half…
Print your own extra assortment boxes for Biltema Art. 71-815 These boxes can be stacked outside the assortment box If anyone wants a 3x1 box I can make a file and they can test it. I only need the 1x1, but modelled and tested the 2x1 and…
Keep your Biltema wrenches organized and accessible with this custom-designed Gridfinity wrench holder. Designed to fit the Art. 10-500 and Art. 10-584 wrench sets (7 mm and 8–19 mm), this tray holds 13 wrenches securely in a 6 x5…
Print approx. €18.72–€22.88 excl. taxPreliminary estimate for one variant
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
Universal hook for Biltema / Angel-Cache fishing rods. Unlike standard screw-in or glued hooks, it requires no modification of the rod. It is intended for a 7–8 m carbon-fibre telescopic fishing rod with the last segment removed. The hook…
LM8UU and LM8LUU grease injector. Cap for the short version can be found on the original model. Files are now version 2: slightly looser tube thread fit made the interface between the "cap" and the injector part a bit thicker (this was a…
The purpose of these are to shield the driver and passengers from the strobelight aimed out from the car. The angle is different between the stl-files but are made for the same strobe light bar. Depending on what window and angle you wish…
Just a litte holder for the bits and screwdrivers from Biltema. Should be a snug fit. Feel free to remix and use as you wish! :)
Mounts for your Biltema pegboard, will put itt out from your wall in case you whant lightting behind it.
Insect net mount for a sun vent (for boat). Frame-only (vent plate) for external metal/plastic nets 2-part setup for 3D printed 'net' (vent base, vent plate). Parts snap to each other by friction, don't need glue Both models are tight…
A wllmounted usbhub holder, hub is from Biltema: https://www.biltema.se/kontor---teknik/datortillbehor/datorkablar/usb-type-c/usb-typ-c-hub-med-3-usb-a-portar-och-kortlasare-2000040579
Update v2: Added a sturdier and easier to print version optimized for printing on the diagonal upper chamfers. Step file included, so you can adjust as well if needed. Bought myself a telescopic snow-broom/ice-scraper from Biltema (…
Hållare för Låsspray Biltema med art nr36-1756 Skruvas fast med 2 skruvar
did you miss some of your corner cover plates for the Biltema Whiteboard 60x45 cm like i did? I was too lazy to collect the pieces and go out to the shop and get a new one for only 1 missing plate. instead i used 30 minutes total to model…
Some toolholders for RYOBI made to fit Biltema or Jula pegboards with 4mm holes cc 12mm. Some of these are made from scratch and some are remixed models to fit Biltema or Jula pegboards. All parts in the pictures are printed with Addnorth…
Replacement enclosure for Biltema 873860 bathroom/kitchen/general fan for 100mm tube. Reuse motor, fan and screws from original. Prints without support. Post process: The holes in the main part for motor mount and motor wires are covered…
a simpel fastener to secure the wooden part on biltema's storage unit. i printed this in PETG but it should work fine in PLA to
New holes with 12mm spacing = 84mm between holes to fit Biltema pegboard. 200x40-18x5 as original naming convention.
A minimal tray shelf holding standard Biltema small melamin trays. Made to hold Biltema 21x27cm trays. https://www.biltema.dk/hjem/kokken-og-husholdning/borddakning-og-service/bakker/serveringsbakke-melamin-27-x-21-cm-2000045264 You need…
Parametric model to hold multimeters and other instruments on Biltema Pegboard which has 12mm C-C hole spacing. Easy to modify in fusion, all relevant parameters can be modified from Change Parameters. Screw holes C-C distance is…
Surprisingly strong, even at PLA 15% infill. Printing PLA/PETG 15% infill no brim, no supports .2mm layers
Víčko na PET láhev vytvořené podle videa na YouTube upravené pro přidělání drátku nebo kroužku na zavěšení jako biltema keš.
Simple and effective holder for your screwdrivers. Saves material but does use more screws than other designs might, but this also allows for the best customizability, as everyone will have a slightly differing set of drivers ;) Designed…
Print in cheap generic TPU 😆 4 walls/top/bottom 25% cubic infill Enjoy !
Fixture for garden hose three way valve for 50mm pole or wall. Designed to fit the cheaper plastic one from Swedish Biltema. Main part for fixturing with single 4mm wood screw (countersunk seems to work best) onto 50mm garden stake/pole.…
Replacement clasp for Biltema 71-010 toolset. Clasp is locked in place with a piece of filament or superglue. If using filament piece it should be driven in with a drill. Or adjust models for more tolerance.
Made a simple adapter to make it possible for LED-light mounting. This design requires you to remove the original debris shield.
https://www.biltema.fi/en-fi/construction/hvac/ventilation/ventilation-fans/bathroom-extractor-fan-2000031716
Replacement buckle for Biltema's reversing mirror for caravans/campers. This is the buckle securing the rubber belts going over the cars original mirror. My orignial one fell of while driving:-/ Make sure to have at least 1 of the bumps…
In Norway and Sweeden you can get the Biltema brass brush (item number 20-0145 in Norway). This is good for nozzle cleaning but needed a holder for the IKEA Skådis system.
Simple clip to hold the lights. One of the original broke so I just made a simple clone. Print on its side, no support
Foot for Biltema gas burner to prevent it from falling over. Biltema Art.nr. 37-699
Have these cable racks mounted on shelves and walls. Needed version for both Biltema 12mm pegboard and Honeycomb Storage Wall HSW. Mounting pegs / holes are placed automatically according to width and distance between them. Depending…
These are replacement boxes for the Biltema 71-960 assortment/tool box, I lost one of mine and the shop don't sell replacements. So I made some. Not perfect, but they fit. Biltema_71-960_large_box dimensions (for the top drawer): L:127mm,…
This is a simpel switch consolle for Biltema 43-030 switch Print in PETG with top facing down without supports
A simple modificaton for the Biltema antenna mount
Simple cap for biltema bracket / t-nailing plate with biltema article number 44-204. Fits plate with dimensions 70 x 50 x 16mm
Just a litte holder for the bits and screwdrivers from Biltema. Should be a snug fit. Feel free to remix and use as you wish! :)
Made a mount for this small blue containers (102 mm x 71 mm) for Biltema pegboard. Made slots, so you have som flexibility .Holds two containers. Print with chamfered side of the skrew slots down on the print plate. 100% infill. 0.2 mm…
a raspberry pi 4 mount for a biltema kopplingsdosa Artnr. 46-2022
Holder for the socket sets from Biltema (short and long). This was my first design in Fusion so it uses quite a lot of filament. Marking strips should stay in place without glue. Use Skadis universal peg to attach it to the board. There…
OSvac adaptor for the older style Biltema shop vacuums.
long story short, my original led light was getting blocked by the tank and chute so there was a dark spot in-front. solved this issue with this little bracket i made. now it lights up the front nicely. bracket was made to fit Biltema ST…
