Xbox Series S Gamepad Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A top-mounted tray for 4 to 5 controllers.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 95
- Makes
- 0
- Views
- 1,575
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I have a number of controllers to store among my XBox and Switch, and figured the Series S is narrow enough to have a few sitting nicely on top of the console. I just made something that keeps them up there.
I've included 3 and 4 slots as options. If you just have XBox controllers, you can only fit 3 on top. If you have other, thinner controllers like the 8Bitdo controllers, you may be able to fit a 4th on top. For the most part, 3 is best.
The bracket fits snugly on top to sandwich the rack onto the console, and there are ridges on one end to hook in the rear.
The front hanger is an option to add one more controller in front, and just hooks onto the front fin.
The rack is best printed with no upper or lower layers, just infill to not block the top vent. I'm partial to 20% Honeycomb.
Print the hanger as in the STL, but you'll want a tiny support at the bevel just so it won't wobble when printing the top third. I've added an example in the pics.
The front controller mount will need a bit of support for the back part, as in the pics.
The base with the hard drive slot is here: https://www.printables.com/model/215847-xbox-series-s-external-25-hdd-vertical-mount