Counting matching models…
A novelty project for my sons series x, looks great and sits on top without any glues,tape etc. A small lip inside makes it sit perfectly on top of console Stl included so you can paint any way you like
Filament Spool Holder/Adapter for bigger filament spools. I currently use it in my Ender 3 Max. It uses a 1in wood dowel, and a 5 mm screw. I use it for 1.5 kilogram filament spools.
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
Saw one the DJI ‘s but nothing for the Holy Stone’s so I whipped this one up to fill the void. Snaps on and makes getting the drone out of the case a breeze.
My x-box series X was overheating despite a lot of space around it on the shelf. What I found is the hot air is filling the shelf and then being recirculated back into the X-box cooling intake. To prevent this, I designed a simple hood to…
Xbox series S minimal slide in wall dock. Designed in a way which use xbox bottom and back rubber pads to eliminate vibrations and add stability. Console can be removed without unscrewing anything and put back in same way. Parts included…
I made this model because I needed access to easily clean under my coffee machine. It's not a complicated or cool model but it does the job. Fits for Philips Series 3200. Enjoy .
Slightly tweaked mount for the BTT Eddy to use the LIDAR USB header on the tool head of the Creality K1 series
Bracket you can use to mount your cooler to your boat.
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
Replacement foot pad for Quilter 202 Series Amp / Amplifier Head! Tested on Overdrive 202, but should work for Tone Block 202.
update 14/05/2025: As some people had issues with the previous file, I did some tests again and made new preset files. update 30/01/2025: As per a request I got, I added a print profile for an UltiMaker 2+ with a 0.6mm nozzle installed
After you have generated the g-code, delete the entire header block. Otherwise, the g-code won't work! The Ultimaker S-line firmware will check the firmware version and say that G-code file cannot be printed because it contains an…
This is a model of the shift linkage bushing on the transmission side of a B Series Acura Integra. This should be very accurate but the only part I wasn't 100% sure on was the taper for the dished side of the bushing as I didn't have the…
Beschreibung An easy-to-print housing for the Shelly plus 1, Shelly plus 1PM, Shelly Plus Gen 2 and Gen 3 The housing has space for up to 3 WAGO 221 clamps. The cables are neatly and securely fixed with cable ties. The reset button and…
The design intent was to be able to print parts in different colors to make painting a non-required step. I printed the 2 main body components in a seam-down orientation with a brim and supports at the bottom. This way, most of the…
A quick template for cutting out the needed hole to fit a Aerocatch 120 series hood latch. The internal rectangle is used to line up the latch pin. The outside bevel is 1:1 to the underside mounting plate.
Print on its side for a strong hook hook may be tight from excess support so sand and place on the bottom skadis board to loosen
Faceplates designed for the GEN2 Decor Drawers by Jerrari. ------ I printed with these settings: Resolution: 0.16 Supports: No Infill: 15 % Only one wall on first layer View from below Print face down and rotate the model by 45 degrees…
After spending a solid week dealing with the drag chain issues on my Creality K1 Max—caused by low tolerances in the chain's joints—I began testing various user-made solutions on Printables. Some worked, while others didn’t. Ultimately, I…
100% as in the series, unlike the others. Print settings: The model is designed for printing with the parameters. All layers 0.1 mm Nozzle 0.4 Filling 100%. To glue evenly, insert a piece of filament 4-6 mm. Print 5 (stones) 1 square, 2…
TPU protection for Philips Ambilight TV remote control series 6 and 7
MODEL FILL MUST BE ABOVE 30% ABS for the best result Don't forget to support me, ı want printables T-shirt
Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat…
Instructions can be found in the folder of this project (Other Files). Please note, this modification is compatible only with our Riser. Versions of the Riser: K1 Series - Riser V1 K1 Series - Riser V2 Add-on for the Riser K1 Series Spool…
Instructions can be found in the folder of this project (Other Files). Versions of the Riser: K1 Series - Riser V1 K1 Series - Riser V2 Add-on for the Riser K1 Series Chain Riser K1 Series Spool Holder for Riser Important: This model has…
Please note, this modification is compatible only with our Riser. Versions of the Riser: K1 Series - Riser V1 K1 Series - Riser V2 Add-on for the Riser K1 Series Chain Riser sprintech.net Happy printing If you like what I do, you can…
This easy mod is a simple yet effective way to extend your lead screw service interval by protecting it from getting covered by debris that may get blown off the bed when the fans are running, especially during a nozzle wipe or a failed…
There are 4 different options: 2 simple inserts, and 2 one-piece designs that raise the printer. The stiffening feet inserts are a great first mod, without the need for tools, experience or fancy print settings. Simply print 4 inserts and…
Take this Brawl Stars charm with you wherever you go with this fun and stylish keychain! Designed for fans of the game, this 3D-printed accessory features an iconic look that captures the essence of the game mode in a compact and…
Take this Brawl Stars charm with you wherever you go with this fun and stylish keychain! Designed for fans of the game, this 3D-printed accessory features an iconic look that captures the essence of the game mode in a compact and…
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
this is designed to fit plano 3600 series tackle boxes, a large format 300mm^3 printer is needed for this due to the size build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my…
The 4-headed beaver of the apocalypse. Also known as "chainsaw" for it's ability to rip through anything. Get them all! FANGS are very fragile- you may need to try different support strategies. Scaling down is not recommended due to…
I started using ABS and PETG a lot in my prints and started noticing funky smell during and post print without realising that these filaments give off some nasty fumes. Previously I conceptualised and came up with Tingkat - Creality K1C…
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
Snorkel to go on the right guard of the RCRUN LC80 crawler shell. As seen on YouTube. Print settings: Standard layer height 15% infill (Cubic) Requires supports
No supports needed. I have opted to use a Diamond-style 3D effect plate with a Hilbert-curve for first layer for extra fanciness. There are 4 “styles” to choose in 3 “sizes” Styles Knobs (one insert, relatively narrow) Pull (two inserts,…
This is an adapter that allows you to attach the filament tube directly to the print head assembly without any connectors. It is recommended to use support normal when printing for the best surface finish. This drawing is applicable to…
This is an adapter that allows you to attach the filament tube directly to the print head assembly without any connectors. It is recommended to use support normal when printing for the best surface finish. This drawing is applicable to…
This handy stand ensures the Philips Bodygroom and its accessories are always within easy reach and ready for use. Its made for a Bodygroom Series 5000 and can store the Bodygroom itself, 4 comb attachments, the back shaving attachment,…
This is a precompiled G-code file designed for motion stability testing on Elegoo Neptune 4 /Pro/ Plus / Max printers. There is no need to slice anything — simply copy the appropriate file to your printer’s SD card and run it directly. 🔧…
Have always been in search for a key bar thingy that the keys can stay in lock position without swinging out randomly due to loss of pressure from the screws. can't pull the trigger to get the Keyport Slide, not just because of the…
4040 Rv2 Series V-slot T-slot Extruded Aluminum - Profiles Collection - Adjust the Z scale to obtain longer profiles Available in 5 variants: 4040 4 Sides Open 4040 1 Sides Open 4040 2 Sides Open (90°) 4040 2 Sides Open (180°) 4040 3…
It uses 3 parts the left, the middle and the right part, if you want to use it for more than 2 nozzles print the middle part as often as needed for your nozzles. -You won't need any supports for the print
I tried to fit the aesthetic of the 500EL with a quick and easy 3D print that will improve visibility of the focusing screen if you're without a viewfinder for your Hasselblad. Print requires no support, standard settings will work fine,…
This is a stand for the Xbox Series S to make it more stable while on its side
This is a custom drawer designed to mount directly onto the 4040 V-slot extrusion at the back of your Neptune 4 printer. The right compartment is perfect for storing nozzles and tools. The left side fits your SD cards neatly. I've also…
4040 Foot Cap Low - Floor Mount Base Aluminium Profile - RV2 Series Suitable for: https://www.printables.com/model/1337775-4040-rv2-series-extruded-aluminum-profiles-collect All our designs are free to download and use—because sharing…
I couldn't find a Battlestar Galactica model from the new series on Printables, so I thought I would bring them to you from Thingiverse. I printed this great model from EDY209 on Thingiverse a while back. I also used the fixed parts by…
Wall mount for Philips Norelco 9000 series shaver (just add one screw). Can be printed without supports in upright position (not upside down). Brim might be required if you have adhesion issues (I printed it without brim). STEP file and…
Models from the YouTube video, "8 color printing on the Neptune 4 Max (part 1)", for installing CoPrint's KCM Set on the Neptune 4 series of printers. https://youtu.be/HRHlSdWBTfk CX-I extruder mount versions: Version A: All M4 hardware…
So, after I put together our Vizio television a while ago, I was deeply disappointed at the lack of design integration for the sound bar. It either had to sit in front of the legs, or way behind, and the angle and spacing of the legs was…
The print comes in many parts that will need to be clipped together. Print settings - (Bambu P1S) Material - Body needs to be PETG because the center section should allow for some flexibilty. PLA wears too quickly. The button extenders…
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
10" rack mount / shelf for Dell Optiplex Micro / MFF Series 5 with a hole for a keystone module. Models that should work: 3040, 5040, 7040, 3050, 5050, 7050, 3060, 5060, 7060, 3070, 5070, 7070. The rectancle on the rear right side is to…
🔫 Flick Series Pistol Stand Minimalistic yet sophisticated design of the stand for any pistol from the Flick series. ✨ Features ***2 versions included:** with and without a compartment for bullets ***Dual functionality:** Both versions…
I couldn’t find any free model that fit perfectly, so I made this one. Prefer “ .step ” over " .stl " for higher resolution. Very easy to print.
Tree – SigilVault Series Sigils Forged for the Woven Path This bead isn’t just decorative—it’s declarative. The Tree is part of the SigilVault Series , a collection of 3D-printed beads forged with meaning, designed for those who craft…
🔐 YubiKey protective case – secure access, perfect fit This YubiKey holder is designed for users who demand instant accessibility without sacrificing protection . No bulky cases, no loose keys, no compromises — just a precisely engineered…
In an act of criminal engineering, the designers at BMW decided to locate the cupholders on the F22 BMW slightly recessed under the dashboard. As a result, I must listen to my wife complain every time she gets a Big Gulp. Fortunately I…
The main body parts have been combined into a single part, which emits the need for screws.
Own a piece of motorsport legend with this 3D printable STL model of the Ferrari 250 GTO (Series I) 1962. This legendary race car model is perfect for automotive enthusiasts and motorsport fans looking to display a pinnacle of classic…
Experience the ultimate in track performance with this 3D printable STL model of the Mercedes-Benz AMG GT Black Series 2023. This track-focused supercar model is perfect for automotive enthusiasts seeking to display the aggressive…
In my continuing quest to bring the most obscure props of Star Trek (original series,) I have done my best to recreate what the “Star Trek Technical Manual” (1975) identified as a Ray Gun. In the TV show, it's never used as a ray gun. In…
I made an attachment for my shaving brush that friction fits onto the Philips Series 7000 shaver cleaning station. The mount only model is there in case your shaving brush doesn't fit into the slot that mine does.
I really liked the original cat ear design—it’s simple, stylish, and easy to print. To make it compatible with my SteelSeries headset (Arctis 7+), I remixed only the clip portion. The original ears can still be used without any changes.…
Panda Touch This bracket will replace the original LCD and will require some disassembly of the machine. This bracket requires you to replace the original wires with a USB-C cable to power the screen. parts list: Panda Touch Panda Touch…
I needed a small purge bin for my p1s but I only had space at the back and wanted to use the default bambu lab spool holder. I found and printed the base model before realising it could be slightly improved for my needs. The model has a…
This is a mod for the steelseries apex 5 keyboard to replace the cable with a usbc female port. No need to cut open a slot in the frame, this adapter can use the already there opening for the cable This model was made to host this kind of…
Support me by using my referral code on Prusa Website: @maxcou_485438
Adapter for maono pm471 series mic, it allows to use standard mic cage and pop filter, thread - m16x1 --- Биба для микрофона maono pm471 series, оно позволяет сохранить стандартную клетку для микрофона и попфильтр, резьба на пиптике - м16…
Exactly as the title indicates, this is a speedloader for Taurus GX2 and GX4 mags. Print upside down and no supports are needed.
This is a simple car holder for the Hörmann HS series remote control. It is held in place with double-sided tape. The overall shape was inspired both by the original Hörmann wall holder and the design by H3dSprint . However, the holder…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian BMP-series Infantry Fighting Vehicle - at…
This fits ONLY the Rotax PN 825-016 filter. I made this some time ago when all I could find was a Rotax $80 filter wrench. I go a little overboard on the strength - 8 vert shells and 50% infill. I've hit it with a hammer on a stuck…
This is a replacement foot designed for the Samsung UN43TU7000 TV. This foot is designed to have the TV sit about 5 cm/2 in lower than it would with the stock feet. This is only the left foot and will require mirroring to print the right…
Screw caps to make your H2D / H2S / H2C / P2S/X2D look more refined. PLA works the best and there are no issues when printing with high-temp materials. Please note that my main platform is MakerWorld, where you can find more of my work:…
Celebration for season 2 coming soon on my short series, Wendigo! Notes: This was one of the longest creations made on this shop. This took over 6 hours to create with holes, eyes, and matched pixel to pixel for the indent of the cloak!…
CHECK OUT THE NEWLY RELEASED ARCHITECTURAL PLANTER COLLECTION ! Inspired by the graceful curves and serene aesthetic of traditional bonsai trees and Zen aesthetics, this model offers a unique fusion of organic form and 3D printed art.…
Wall mount for Philips series 5000 MG5931, OneBlade QP2520/30, Babyliss E111E, E112E, E116E.
Thanks to @shanelord_111630 for the bootstrap. A bunch of folks in the home assistant community bough these Elo 15" I-series 3.0 tables for pennies on the dollar - what ensued was a community effort to update and get a variety of useful…
Gridfinity 4x3x6U P2S toolbox w/ tray insert. This is a modified version of my A1/A1 Mini insert. I believe P2S and H2 series use same hotend, so this should work, except for the silicone sock which H2 Series is different. As for the…
This is a silhouette of the BMW 2 Series grand coupe. ive used Tinkercad to create this complete model, the bmw model is based on a actual picture of the vehicle. printed on a layer height of 0.2mm and with a 0.4mm nozzle using the…
This is a clip to hold the toolhead electrical cable using the PTFE tube. Compatibility with all Adventure M5 printers: Flashforge Adventurer 5M Flashforge Adventurer Pro Flashforge Adventurer AD5X
Replacement for a full front panel with a 5.25" drive cutout in ThinkCentre M series computers. Attach the bezel to the back of the front panel using M2.5 screws no longer than 4mm. Printed using PLA filament.
Chihiros Series B Light mount for Aqueon aquariums. The stock mount is too small for tanks with a large black rim like Aqueon tanks. This mount fits the original metal rods and fits snuggly on an Aqueon tank rim. I suggest printing with…
Summary The model is an adapter that is placed between the mount for the navigation device holder and the mounting rod, thereby increasing the height and making it easier to read the motorcycle display. Look at the very last picture. This…
Printable muffler for Allen-Bradley 855HM series sealed annunciator/alarm horns. These horns are designed and intended for industrial environments and have a range from 107-119 db and can be too loud for some situations. I designed this…
Hi everyone, If you’ve upgraded to the Creality CFS system , you might have noticed the stock nozzle wiping routine is not using the purge chute nozzle wipe one. I’ve written a custom macro, cfs_nozzle_clear , to make the cleaning process…
Faceplates with funny faces designed for the GEN2 Decor Drawers by Jerrari, inspired by Karen’s original style, Kawaii Faceplate There are two types of handles for the faceplate. In the old design, the handle (eyes) is short. In the new…
I was missing a subassembly: invol-assem4-plan-9-7-23-complete.FCStd. It is now uploaded. The Printables web system alters the file suffix to lowercase. If the file downloads as invol-assem4-plan-9-7-23-complete. fcstd , you may need to…
Included basic Quadlock disk adaptor. It can simply be combined with our models on print bed for other options. No surprise PLA is not suitable for these mounts in Oz summer. Might even be struggling with PETG. PETG seems to be holding…
I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…
This triple AMS HT holder not only raises the glass top to any X/P series printer up a little, but it also allows for 3 AMS HTs to fit snuggly on top of your X/P series printers while making it look clean! The glass panel fits snuggly…
Wall Mount for Makita DUB185Z XBU05 Series Leaf Blower printed at 20% PLA
![Model Wendigo (From Short Series) [WORKS!]](https://media.printables.com/media/prints/2f250d03-f15e-4033-ae42-c0695f4e4e03/images/11351631_301dfc55-b483-4b33-9f95-fb36f2271147_88025c1c-db13-43a1-a41f-544ca152f6ad/screenshot-2025-12-06-220014.png)
