Rotax 900 series Oil Filter Wrench.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This fits ONLY the Rotax PN 825-016 filter.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This fits ONLY the Rotax PN 825-016 filter. I made this some time ago when all I could find was a Rotax $80 filter wrench. I go a little overboard on the strength - 8 vert shells and 50% infill. I've hit it with a hammer on a stuck filter. I use PLA, the one I tested in PETG was flexible enough that it would cam off the slightly tapered filter flats - requiring use of both hands to turn and hold it on. Works great - I've given away about 50 of them. I designed it from measuring a filter - I did not copy an existing rotax wrench (so no IP concerns).
Update: I printed one with the 3D fuel PCTG - that's good stuff ! :-)