Rotax 900 series Oil Filter Wrench.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits ONLY the Rotax PN 825-016 filter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This fits ONLY the Rotax PN 825-016 filter. I made this some time ago when all I could find was a Rotax $80 filter wrench. I go a little overboard on the strength - 8 vert shells and 50% infill. I've hit it with a hammer on a stuck filter. I use PLA, the one I tested in PETG was flexible enough that it would cam off the slightly tapered filter flats - requiring use of both hands to turn and hold it on. Works great - I've given away about 50 of them. I designed it from measuring a filter - I did not copy an existing rotax wrench (so no IP concerns).
Update: I printed one with the 3D fuel PCTG - that's good stuff ! :-)