Key Blank or holder Implements for Roxon Flex Series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Key Blank to be print in metal for key duplication or you can cut directly in the 3d model and print the key
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 65
- Makes
- 0
- Views
- 908
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Have always been in search for a key bar thingy that the keys can stay in lock position without swinging out randomly due to loss of pressure from the screws.
can't pull the trigger to get the Keyport Slide, not just because of the pricing. Also it looks very bulky to carry around.
i guess the Roxon Flex system is the closest thing i can get my hands on and modify easily.
And it does, only v9, got all 5keys i needed. My next step will be modifying the flex into more slots. I need 6slots but now only have 5slots for the Flex Companion
All the key blanks are short implements (except the Kaba key holder), can use on all three Flex platforms: Flex Companion ; Mini Flex Companion ; Flex Modular
for the keys, please take note:
1.) LUC-1D ( JMA ) / LU2 ( Silca ) / LCK11 ( Orion )
I draw this from my Queen Lock and key, TESTED to print directly with pin cutout, can open the lock directly.
2.) U-6L ( JMA ) / UL055 ( Silca ) / UNL6L ( Orion ) / UN6S ( Keyline )
I draw this from my Keyline Lock and Key and image from JMA, not TESTED to print with cutout, the key way shape is hard to print with FDM. I test print with the shape, fitting is okay, should be able to print in metal and use standard key copy machine to cut the key.
3.) Duro DK7
I draw this from my Duro lock and key, TESTED to print directly with pin cutout, can open the lock directly. NOTE!! the 3d model follows the key thickness, so the pin depth is correct. once you got the pin depth correct, cut from the tool holder end to make the thickness go down to 2.1mm(thk) the key will still work that way.
4.) Tri-Circle Padlock
I draw this from my Tri-Circle Padlock, it should work fine on a lot of china made cheap small padlocks. TESTED to print directly with pin cutout, can open the lock directly.
5.) Kaba experT
this one I draw the key blank and tested the shape, can fit nicely. but I really can't get the measurements of the 45degreed pins. and i found that no one in the market except Kaba itself said they can copy Kaba experT keys. so I changed the idea of making the key blank for Kaba. but make a key holder for the key, this is going to take 2slots, like the T-shank holder
