1 / 4
Rugged Retro Gaming Station for RaspberryPi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged Box for Raspberry Pi Zero 2W and 7 Inch Display
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I had the idea of making a rugged style box with integrated display for my retro gaming project and thats the result :-)
Hardware needed:
- 1x Raspberry Pi Zero 2W
- 1x 7 inch Display (i bought the cheapest i could find online. Unfortunately, I don't know if all these available displays are identical
- 1x Mini HDMI to HDMI Cable
- 2x Micro USB cable for Power Supply
- 1-2x Gamepads
- 1x Micro USB Hub for the Gamepads
- 6x M3x30mm Screws and Nuts to assemble the Box
- 4x M3x6mm Screws and M3x6mm Heat Inserts to attach the Display
- 2x M3x6mm Screws and M3x6mm Heat Inserts to assemble the Raspberry Pi Case
- 6x 6x3mm Magnets for the swappable Raspy positioning Points
Please follow the official instructions for retropie to get everything running.
attached is an example for those 7 inch Display. On/Off switch will be covered from the shell so please install it in ON-Mode
The RaspberryPi Case uses magnets and can be attached on the left inner side of the box or on the back side of the Lid.
