1 / 4
Rugged Retro Gaming Station for RaspberryPi
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rugged Box for Raspberry Pi Zero 2W and 7 Inch Display
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I had the idea of making a rugged style box with integrated display for my retro gaming project and thats the result :-)
Hardware needed:
- 1x Raspberry Pi Zero 2W
- 1x 7 inch Display (i bought the cheapest i could find online. Unfortunately, I don't know if all these available displays are identical
- 1x Mini HDMI to HDMI Cable
- 2x Micro USB cable for Power Supply
- 1-2x Gamepads
- 1x Micro USB Hub for the Gamepads
- 6x M3x30mm Screws and Nuts to assemble the Box
- 4x M3x6mm Screws and M3x6mm Heat Inserts to attach the Display
- 2x M3x6mm Screws and M3x6mm Heat Inserts to assemble the Raspberry Pi Case
- 6x 6x3mm Magnets for the swappable Raspy positioning Points
Please follow the official instructions for retropie to get everything running.
attached is an example for those 7 inch Display. On/Off switch will be covered from the shell so please install it in ON-Mode
The RaspberryPi Case uses magnets and can be attached on the left inner side of the box or on the back side of the Lid.
